<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<chapter id="a_configuration">
  <title>Configuration</title>

  <para>After you <link linkend="a_installation">installed</link> LAM you can
  configure it to fit your needs. The complete configuration can be done
  inside the application. There is no need to edit configuration files.</para>

  <para>Please point you browser to the location where you installed LAM. E.g.
  for Debian/RPM this is http://yourServer/lam. If you installed LAM via the
  tar.bz2 then this may vary. You should see the following page:</para>

  <screenshot>
    <mediaobject>
      <imageobject>
        <imagedata fileref="images/login.png"/>
      </imageobject>
    </mediaobject>
  </screenshot>

  <para>If you see an error message then you might need to install an
  additional PHP extension. Please follow the instructions and reload the page
  afterwards.</para>

  <para>Now you are ready to configure LAM. Click on the "LAM configuration"
  link to proceed.</para>

  <screenshot>
    <mediaobject>
      <imageobject>
        <imagedata fileref="images/configOverview.png"/>
      </imageobject>
    </mediaobject>
  </screenshot>

  <para>Here you can change LAM's general settings, setup server profiles for
  your LDAP server(s) and configure the <link linkend="a_selfService">self
  service</link> (LAM Pro). You should start with the general settings and
  then setup a server profile.</para>

  <section id="generalSettings">
    <title>General settings</title>

    <para>After selecting "Edit general settings" you will need to enter the
    <link linkend="a_configPasswords">master configuration password</link>.
    The default password for new installations is "lam". Now you can edit the
    general settings.</para>

    <section>
      <title>License (LAM Pro only)</title>

      <para>This is only required when you run LAM Pro. Please enter the
      license key from your <ulink
      url="https://www.ldap-account-manager.org/lamcms/user/me">customer
      profile</ulink>. In case you have purchased multiple licenses please
      only enter one license key block per installation.</para>

      <para>When you entered the license key then the license details can be
      seen on LAM configuration overview page.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral7.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>
    </section>

    <section>
      <title>Security settings</title>

      <para>Here you can set a time period after which inactive sessions are
      automatically invalidated. The selected value represents minutes of
      inactivity.</para>

      <para>You may also set a list of IP addresses which are allowed to
      access LAM. The IPs can be specified as full IP (e.g. 123.123.123.123)
      or with the "*" wildcard (e.g. 123.123.123.*). Users which try to access
      LAM via an untrusted IP only get blank pages. There is a separate field
      for LAM Pro self service.</para>

      <para id="sessionEncryption">Session encryption will encrypt sensitive
      data like passwords in your session files. This is only available when
      PHP <ulink
      url="http://php.net/manual/en/book.openssl.php">OpenSSL</ulink> is
      active. This adds extra security but also costs performance. If you
      manage a large directory you might want to disable this and take other
      actions to secure your LAM server.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral1.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>

      <para id="conf_sslCert"><emphasis role="bold">SSL certificate
      setup:</emphasis></para>

      <para>By default, LAM uses the CA certificates that are preinstalled on
      your system. This will work if you connect via SSL/TLS to an LDAP server
      that uses a certificate signed by a well-known CA. In case you use your
      own CA (e.g. company internal CA) you can import the CA certificates
      here.</para>

      <para>Please note that this can affect other web applications on the
      same server if they require different certificates. There seem to be
      problems on Debian systems and you may also need to restart Apache. In
      case of any problems please delete the uploaded certificates and use the
      <link linkend="ssl_certSystem">system setup</link>.</para>

      <para>You can either upload a DER/PEM formatted certificate file or
      import the certificates directly from an LDAP server that is available
      with LDAP+SSL (ldaps://). LAM will automatically override system
      certificates if at least one certificate is uploaded/imported.</para>

      <para>The whole certificate list can be downloaded in PEM format. You
      can also delete single certificates from the list.</para>

      <para>Please note that you might need to restart your webserver if you
      do any changes to this configuration.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral4.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>
    </section>

    <section>
      <title>Password policy</title>

      <para>This allows you to specify a central password policy for LAM. The
      policy is valid for all password fields inside LAM admin (excluding tree
      view) and LAM self service. Configuration passwords do not need to
      follow this policy.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral2.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>

      <para>You can set the minimum password length and also the complexity of
      the passwords.</para>
    </section>

    <section id="conf_logging">
      <title>Logging</title>

      <para>LAM can log events (e.g. user logins). You can use system logging
      (syslog for Unix, event viewer for Windows) or log to a separate file.
      Please note that LAM may log sensitive data (e.g. passwords) at log
      level "Debug". Production systems should be set to "Warning" or
      "Error".</para>

      <para>The PHP error reporting is only for developers. By default LAM
      does not show PHP notice messages in the web pages. You can select to
      use the php.ini setting here or printing all errors and notices.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral3.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>
    </section>

    <section>
      <title>Additional options</title>

      <para id="mailEOL"><emphasis role="bold">Email format</emphasis></para>

      <para>Some email servers are not standards compatible. If you receive
      mails that look broken you can change the line endings for sent mails
      here. Default is to use "\r\n".</para>

      <para>At the moment, this option is only available in LAM Pro as there
      is no mail sending in the free version. See <link
      linkend="mailSetup">here</link> for setting up your SMTP server.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral6.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>
    </section>

    <section>
      <title>Change master password</title>

      <para>If you would like to change the master configuration password then
      enter a new password here.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configGeneral5.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>
    </section>
  </section>

  <section id="serverProfiles">
    <title>Server profiles</title>

    <para>The server profiles store information about your LDAP server (e.g.
    host name) and what kind of accounts (e.g. users and groups) you would
    like to manage. There is no limit on the number of server profiles. See
    the <link linkend="confTypicalScenarios">typical scenarios</link> about
    how to structure your server profiles.</para>

    <section>
      <title>Manage server profiles</title>

      <para>Select "Manage server profiles" to open the profile management
      page.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configProfiles1.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>

      <para>Here you can create, rename and delete server profiles. The <link
      linkend="a_configPasswords">passwords</link> of your server profiles can
      also be reset.</para>

      <para>You may also specify the default server profile. This is the
      server profile which is preselected at the login page. It also specifies
      the language of the login and configuration pages.</para>

      <para><emphasis role="bold">Templates for new server
      profiles</emphasis></para>

      <para>You can create a new server profile based on one of the built-in
      templates or any existing profile. Of course, the account types and
      selected modules can be changed after you created your profile.</para>

      <para>Built-in templates:</para>

      <itemizedlist>
        <listitem>
          <para>addressbook: simple profile for user management with
          inetOrgPerson object class</para>
        </listitem>

        <listitem>
          <para>samba3: Samba 3 users, groups, hosts and domains</para>
        </listitem>

        <listitem>
          <para>unix: Unix users and groups (posixAccount/Group)</para>
        </listitem>

        <listitem>
          <para>windows_samba4: Active Directory user, group and host
          management</para>
        </listitem>
      </itemizedlist>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configProfiles2.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>

      <para>All operations on the profile management page require that you
      authenticate yourself with the <link
      linkend="a_configPasswords">configuration master password</link>.</para>
    </section>

    <section>
      <title>Editing a server profile</title>

      <para>Please select you server profile and enter its password to edit a
      server profile.</para>

      <screenshot>
        <mediaobject>
          <imageobject>
            <imagedata fileref="images/configProfiles3.png"/>
          </imageobject>
        </mediaobject>
      </screenshot>

      <para>Each server profile contains the following information:</para>

      <itemizedlist>
        <listitem>
          <para><emphasis role="bold">General settings:</emphasis> general
          settings about your LDAP server (e.g. host name and security
          settings)</para>
        </listitem>

        <listitem>
          <para><emphasis role="bold">Account types:</emphasis> list of
          account types (e.g. users and groups) that you would like to manage
          and type specific settings (e.g. LDAP suffix)</para>
        </listitem>

        <listitem>
          <para><emphasis role="bold">Modules:</emphasis> list of modules
          which define what account aspects (e.g. Unix, Samba, Kolab) you
          would like to manage</para>
        </listitem>

        <listitem>
          <para><emphasis role="bold">Module settings:</emphasis> settings
          which are specific for the selected account modules on the page
          before</para>
        </listitem>
      </itemizedlist>

      <section id="general_settings">
        <title>General settings</title>

        <para>Here you can specify the LDAP server and some security
        settings.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles4.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>The server address of your LDAP server can be a DNS name or an
        IP address. Use ldap:// for unencrypted LDAP connections or TLS
        encrypted connections. LDAP+SSL (LDAPS) encrypted connections are
        specified with ldaps://. The port value is optional. TLS cannot be
        combined with ldaps://.</para>

        <para>Hint: If you use a master/slave setup with referrals then point
        LAM to your master server. Due to bugs in the underlying LDAP
        libraries pointing to a slave might cause issues on write
        operations.</para>

        <para>LAM includes an LDAP browser which allows direct modification of
        LDAP entries. If you would like to use it then enter the LDAP suffix
        at "Tree suffix".</para>

        <para>The search limit is used to reduce the number of search results
        which are returned by your LDAP server.</para>

        <para>The access level specifies if LAM should allow to modify LDAP
        entries. This feature is only available in LAM Pro. LAM non-Pro
        releases use write access. See <link
        linkend="a_accessLevelPasswordReset">this page</link> for details on
        the different access levels.</para>

        <para><emphasis role="bold">Advanced options</emphasis></para>

        <para>Display name: Sometimes, you may not want to display the server
        address on the login page. In this case you can setup a display name
        here (e.g. "Production").</para>

        <para>Follow referrals: By default LAM will not follow LDAP referrals.
        This is ok for most installations. If you use LDAP referrals please
        activate the referral option in advanced settings.</para>

        <para>Paged results: Paged results should be activated only if you
        encounter any problems regarding size limits on Active Directory. LAM
        will then query LDAP to return results in chunks of 999
        entries.</para>

        <para>Referential integrity overlay: Activate this checkbox if you
        have any server side extension for referential integrity in place. In
        this case the server will cleanup references to LDAP entries that are
        deleted.</para>

        <para>The following actions are skipped in this case:</para>

        <itemizedlist>
          <listitem>
            <para>Users: group of (unique) names: memberships are not deleted
            when user is deleted</para>
          </listitem>

          <listitem>
            <para>Users: organizational roles: role assignments are not
            deleted when user is deleted</para>
          </listitem>

          <listitem>
            <para>Groups: groupOf(Unique)Names: memberships are not deleted
            when group is deleted</para>
          </listitem>
        </itemizedlist>

        <literallayout>
</literallayout>

        <para>LAM is translated to many different languages. Here you can
        select the default language for this server profile. The language
        setting may be overridden at the LAM login page.</para>

        <para>Please also set your time zone here.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles5.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>LAM can manage user home directories and quotas with an external
        script. You can specify the home directory server and where the script
        is located. The default rights for new home directories can be set,
        too.</para>

        <para>You can provide a fixed user name. If you leave the field empty
        then LAM will use your current account (the account you used to login
        to LAM).</para>

        <para>There are two possibilities to connect to your home
        directory/quota server:</para>

        <itemizedlist>
          <listitem>
            <para>SSH key (recommended): Please generate a SSH key pair and
            provide the location to the <emphasis
            role="bold">private</emphasis> key file. If the key is protected
            by a password you can also specify it here.</para>
          </listitem>

          <listitem>
            <para>Password: If you do not set a SSH key then LAM will try to
            connect with your current account (the password you used to login
            to LAM).</para>
          </listitem>
        </itemizedlist>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles6.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para id="profile_mail">LAM Pro users may directly set passwords from
        list view. You can configure if it should be possible to set specific
        passwords and showing password on screen is allowed.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles10.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>LAM Pro users can send out changed passwords to their users.
        Here you can specify the options for these mails.</para>

        <para>If you select "Allow alternate address" then password mails can
        be sent to any address (e.g. a secondary address if the user account
        is also bound to the mailbox).</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles9.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>LAM supports two methods for login:</para>

        <itemizedlist>
          <listitem>
            <para>Fixed list</para>
          </listitem>

          <listitem>
            <para>LDAP search</para>
          </listitem>
        </itemizedlist>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles8.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>The first one is to specify a fixed list of LDAP DNs that are
        allowed to login. Please enter one DN per line.</para>

        <para>The second one is to let LAM search for the DN in your
        directory. E.g. if a user logs in with the user name "joe" then LAM
        will do an LDAP search for this user name. When it finds a matching DN
        then it will use this to authenticate the user. The wildcard "%USER%"
        will be replaced by "joe" in this example. This way you can provide
        login by user name, email address or other LDAP attributes.</para>

        <para>Additionally, you can enable HTTP authentication when using
        "LDAP search". This way the web server is responsible to authenticate
        your users. LAM will use the given user name + password for the LDAP
        login. You can also configure this to setup advanced login
        restrictions (e.g. require group memberships for login). To setup HTTP
        authentication in Apache please see this <ulink
        url="http://httpd.apache.org/docs/2.2/howto/auth.html">link</ulink>
        and an example for LDAP authentication <link lang=""
        linkend="apache_http_auth">here</link>.</para>

        <para><emphasis role="bold">Hint:</emphasis> LDAP search with group
        membership check can be done with either <link
        linkend="apache_http_auth">HTTP authentication</link> or LDAP overlays
        like <ulink
        url="http://www.openldap.org/doc/admin24/overlays.html">"memberOf"</ulink>
        or <ulink
        url="http://www.openldap.org/doc/admin24/overlays.html">"Dynamic
        lists"</ulink>. Dynamic lists allow to insert virtual attributes to
        your user entries. These can then be used for the LDAP filter (e.g.
        "(&amp;(uid=%USER%)(memberof=cn=admins,ou=groups,dc=company,dc=com))").</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles7.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para><emphasis role="bold">2-factor authentication</emphasis></para>

        <para>LAM supports 2-factor authentication for your users. This means
        the user will not only authenticate by user+password but also with
        e.g. a token generated by a mobile device. This adds more security
        because the token is generated on a physically separated device
        (typically mobile phone).</para>

        <para>The token is validated by a second application. LAM currently
        supports:</para>

        <itemizedlist>
          <listitem>
            <para><ulink
            url="https://www.privacyidea.org/">privacyIdea</ulink></para>
          </listitem>
        </itemizedlist>

        <para>By default LAM will enforce to use a token and reject users that
        did not setup one. You can set this check to optional. But if a user
        has setup a token then this will always be required.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles11.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>After logging in with user + password LAM will ask for the 2nd
        factor. If the user has setup multiple factors then he can choose one
        of them.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles12.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para><emphasis role="bold">Password</emphasis></para>

        <para>You may also change the password of this server profile. Please
        just enter the new password in both password fields.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configProfiles13.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>
      </section>

      <section>
        <title>Account types</title>

        <para>LAM supports to manage various types of LDAP entries (e.g.
        users, groups, DHCP entries, ...). On this page you can select which
        types of entries you want to manage with LAM.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configTypes1.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>The section at the top shows a list of possible types. You can
        activate them by simply clicking on the plus sign next to it.</para>

        <para>Each account type has the following options:</para>

        <itemizedlist>
          <listitem>
            <para><emphasis role="bold">LDAP suffix:</emphasis> the LDAP
            suffix where entries of this type should be managed</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">List attributes:</emphasis> a list of
            attributes which are shown in the account lists</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">Additional LDAP filter:</emphasis> LAM
            will automatically detect the right LDAP entries for each account
            type. This can be used to further limit the number of visible
            entries (e.g. if you want to manage only some specific groups).
            You can use "@@LOGIN_DN@@" as wildcard (e.g.
            "(owner=@@LOGIN_DN@@)"). It will be replaced by the DN of the user
            who is logged in.</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">Hidden:</emphasis> This is used to
            hide account types that should not be displayed but are required
            by other account types. E.g. you can hide the Samba domains
            account type and still assign domains when you edit your
            users.</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">Read-only (LAM Pro only):</emphasis>
            This allows to set a single account type to read-only mode. Please
            note that this is a restriction on functional level (e.g. group
            memberships can be changed on user page even if groups are
            read-only) and is no replacement for setting up proper ACLs on
            your LDAP server.</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">Custom label:</emphasis> Here you can
            set a custom label for the account types. Use this if the standard
            label does not fit for you (e.g. enter "Servers" for
            hosts).</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">No new entries (LAM Pro
            only):</emphasis> Use this if you want to prevent that new
            accounts of this type are created by your users. The GUI will hide
            buttons to create new entries and also disable file upload for
            this type.</para>
          </listitem>

          <listitem>
            <para><emphasis role="bold">Disallow delete (LAM Pro
            only):</emphasis> Use this if you want to prevent that accounts of
            this type are deleted by your users.</para>
          </listitem>
        </itemizedlist>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configTypes2.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>On the next page you can specify in detail what extensions
        should be enabled for each account type.</para>
      </section>

      <section>
        <title>Modules</title>

        <para>The modules specify the active extensions for each account type.
        E.g. here you can setup if your user entries should be address book
        entries only or also support Unix or Samba.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configModules1.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>Each account type needs a so called "base module". This is the
        basement for all LDAP entries of this type. Usually, it provides the
        structural object class for the LDAP entries. There must be exactly
        one active base module for each account type.</para>

        <para>Furthermore, there may be any number of additional active
        account modules. E.g. you may select "Personal" as base module and
        Unix + Samba as additional modules.</para>
      </section>

      <section>
        <title>Module settings</title>

        <para>Depending on the activated account modules there may be
        additional configuration options available. They can be found on the
        "Module settings" tab. E.g. the Personal account module allows to hide
        several input fields and the Unix module requires to specify ranges
        for UID numbers.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/configSettings1.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>
      </section>
    </section>

    <section>
      <title>Cron jobs (LAM Pro)</title>

      <para>LAM Pro can execute common tasks via cron job. This can be used to
      e.g. notify your users before their passwords expire.</para>

      <section>
        <title>LDAP and database configuration</title>

        <para>Please add the LDAP bind user and password for all jobs. This
        LDAP account will be used to perform all LDAP read and write
        operations.</para>

        <para>Next, select the database type where LAM should store job
        related data. Supported databases are SQLite and MySQL.</para>

        <para><emphasis role="bold">SQLite</emphasis></para>

        <para>This is a simple file based database. It needs no special
        database server. The database file will be located next to the server
        profile in config directory.</para>

        <para>You will need to install the SQLite PDO module for PHP
        (pdo_sqlite.so). For Debian this is located in package
        php5-sqlite.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/jobs1.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para><emphasis role="bold">MySQL</emphasis></para>

        <para>This will store all job data in an external MySQL
        database.</para>

        <para>You will need to install the MySQL PDO module for PHP
        (pdo_mysql.so). For Debian this is located in package
        php5-mysql.</para>

        <para>Steps to create a MySQL database and user:</para>

        <literallayout># login
mysql -u root -p
# create a database
mysql&gt; create database lam_cron;
#
mysql&gt; CREATE USER 'lam_cron'@'%' IDENTIFIED BY 'password';
mysql&gt; CREATE USER 'lam_cron'@'localhost' IDENTIFIED BY 'password';
# grant access for new user
mysql&gt; GRANT ALL PRIVILEGES ON lam_cron.* TO 'lam_cron'@'%';
mysql&gt; GRANT ALL PRIVILEGES ON lam_cron.* TO 'lam_cron'@'localhost';
</literallayout>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/jobs3.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para><literallayout>
</literallayout><emphasis role="bold">Test your settings</emphasis></para>

        <para>After the LDAP and database settings are done you can test your
        settings.</para>

        <para><emphasis role="bold">Cron entry</emphasis></para>

        <para>LAM also prints the crontab line that you need to run the
        configured jobs on a daily basis. The command must be run as the same
        user as your webserver is running. You are free to change the starting
        time of the script or run it more often.</para>

        <para>Dry-run: You can perform a dry-run of the job. This will not
        perform any actions but only print what would be done. For this please
        put "--dryRun" at the end of the command. E.g.:</para>

        <literallayout>  /usr/share/ldap-account-manager/lib/cron.sh lam 123456789 --dryRun</literallayout>

        <para/>
      </section>

      <section>
        <title>Adding jobs</title>

        <para>To add a new job just click on the "Add job" button and select
        the job type you need. The list of available jobs depends on your
        active account modules. E.g. the PPolicy job will only be available if
        you activated PPolicy user module.</para>

        <para>Depending on the job type jobs may be added multiple times with
        different configurations. For descriptions about the available job
        types see next chapters.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/jobs2.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <section>
          <title>PPolicy: Notify users about password expiration</title>

          <para>This will send your users an email reminder before their
          password expires.</para>

          <para>You need to activate the PPolicy module for users to be able
          to add this job. The job can be added multiple times (e.g. to send a
          second warning at a later time).</para>

          <para>LAM calculates the expiration date based on the last password
          change and the assigned password policy (or the default policy)
          using attributes pwdMaxAge and pwdExpireWarning.</para>

          <para>Examples:</para>

          <para>Warning time (pwdExpireWarning) = 14 days, notification period
          = 10: LAM will send out the email 24 days before the password
          expires</para>

          <para>Warning time (pwdExpireWarning) = 14 days, notification period
          = 0: LAM will send out the email 14 days before the password
          expires</para>

          <para>No warning time (pwdExpireWarning), notification period = 10:
          LAM will send out the email 10 days before the password
          expires</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_ppolicy1.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>From address</entry>

                  <entry>The email address to set as FROM.</entry>
                </row>

                <row>
                  <entry>Reply-to address</entry>

                  <entry>Optional Reply-to address for email.</entry>
                </row>

                <row>
                  <entry>CC address</entry>

                  <entry>Optional CC mail address.</entry>
                </row>

                <row>
                  <entry>BCC address</entry>

                  <entry>Optional BCC mail address.</entry>
                </row>

                <row>
                  <entry>Subject</entry>

                  <entry>The email subject line. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Text</entry>

                  <entry>The email body text. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Notification period</entry>

                  <entry>Number of days to notify before password
                  expires.</entry>
                </row>

                <row>
                  <entry>Default password policy</entry>

                  <entry>Default PPolicy password policy entry (object class
                  "pwdPolicy").</entry>
                </row>
              </tbody>
            </tgroup>
          </table>

          <para>Wildcards:</para>

          <para>You can enter LDAP attributes as wildcards in the form
          @@ATTRIBUTE_NAME@@. E.g. to add the user's common name use "@@cn@@".
          For the common name it would be "@@cn@@".</para>

          <para>There are also two special wildcards for the expiration date.
          @@EXPIRE_DATE_DDMMYYYY@@ will print the date as e.g. "31.12.2016".
          @@EXPIRE_DATE_YYYYMMDD@@ will print the date as e.g.
          "2016-12-31".</para>
        </section>

        <section>
          <title>389ds: Notify users about password expiration</title>

          <para>This will send your users an email reminder before their
          password expires.</para>

          <para>You need to activate the Account Locking module for users to
          be able to add this job. The job can be added multiple times (e.g.
          to send a second warning at a later time).</para>

          <para>LAM calculates the expiration date based on the attribute
          passwordExpirationTime.</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_389dsPasswordMail1.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <para><table>
              <title>Options</title>

              <tgroup cols="2">
                <tbody>
                  <row>
                    <entry><emphasis role="bold">Option</emphasis></entry>

                    <entry><emphasis
                    role="bold">Description</emphasis></entry>
                  </row>

                  <row>
                    <entry>From address</entry>

                    <entry>The email address to set as FROM.</entry>
                  </row>

                  <row>
                    <entry>Reply-to address</entry>

                    <entry>Optional Reply-to address for email.</entry>
                  </row>

                  <row>
                    <entry>CC address</entry>

                    <entry>Optional CC mail address.</entry>
                  </row>

                  <row>
                    <entry>BCC address</entry>

                    <entry>Optional BCC mail address.</entry>
                  </row>

                  <row>
                    <entry>Subject</entry>

                    <entry>The email subject line. Supports wildcards, see
                    below.</entry>
                  </row>

                  <row>
                    <entry>Text</entry>

                    <entry>The email body text. Supports wildcards, see
                    below.</entry>
                  </row>

                  <row>
                    <entry>Notification period</entry>

                    <entry>Number of days to notify before password
                    expires.</entry>
                  </row>
                </tbody>
              </tgroup>
            </table></para>

          <para>Wildcards:</para>

          <para>You can enter LDAP attributes as wildcards in the form
          @@ATTRIBUTE_NAME@@. E.g. to add the user's common name use "@@cn@@".
          For the common name it would be "@@cn@@".</para>

          <para>There are also two special wildcards for the expiration date.
          @@EXPIRE_DATE_DDMMYYYY@@ will print the date as e.g. "31.12.2016".
          @@EXPIRE_DATE_YYYYMMDD@@ will print the date as e.g.
          "2016-12-31".</para>
        </section>

        <section>
          <title>Shadow: Notify users about password expiration</title>

          <para>This will send your users an email reminder before their
          password expires.</para>

          <para>You need to activate the Shadow module for users to be able to
          add this job. The job can be added multiple times (e.g. to send a
          second warning at a later time).</para>

          <para>LAM calculates the expiration date based on the last password
          change, the password warning time (attribute "shadowWarning") and
          the specified notification period.</para>

          <para>Examples:</para>

          <para>Warning time = 14, notification period = 10: LAM will send out
          the email 24 days before the password expires</para>

          <para>Warning time = 14, notification period = 0: LAM will send out
          the email 14 days before the password expires</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_shadow1.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>From address</entry>

                  <entry>The email address to set as FROM.</entry>
                </row>

                <row>
                  <entry>Reply-to address</entry>

                  <entry>Optional Reply-to address for email.</entry>
                </row>

                <row>
                  <entry>CC address</entry>

                  <entry>Optional CC mail address.</entry>
                </row>

                <row>
                  <entry>BCC address</entry>

                  <entry>Optional BCC mail address.</entry>
                </row>

                <row>
                  <entry>Subject</entry>

                  <entry>The email subject line. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Text</entry>

                  <entry>The email body text. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Notification period</entry>

                  <entry>Number of days to notify before password
                  expires.</entry>
                </row>
              </tbody>
            </tgroup>
          </table>

          <para>Wildcards:</para>

          <para>You can enter LDAP attributes as wildcards in the form
          @@ATTRIBUTE_NAME@@. E.g. to add the user's common name use "@@cn@@".
          For the common name it would be "@@cn@@".</para>

          <para>There are also two special wildcards for the expiration date.
          @@EXPIRE_DATE_DDMMYYYY@@ will print the date as e.g. "31.12.2016".
          @@EXPIRE_DATE_YYYYMMDD@@ will print the date as e.g.
          "2016-12-31".</para>
        </section>

        <section>
          <title>Shadow: Delete or move expired accounts</title>

          <para>You can automatically delete or move expired accounts. The job
          checks Shadow account expiration dates (not password expiration
          dates).</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_shadow2.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>Delay</entry>

                  <entry>Number of days to wait after the account is
                  expired.</entry>
                </row>

                <row>
                  <entry>Action</entry>

                  <entry>Delete or move accounts</entry>
                </row>

                <row>
                  <entry>Target DN</entry>

                  <entry>Move only: specifies the DN where accounts are
                  moved</entry>
                </row>
              </tbody>
            </tgroup>
          </table>
        </section>

        <section>
          <title>Windows: Notify users about password expiration</title>

          <para>This will send your users an email reminder before their
          password expires.</para>

          <para>You need to activate the Windows module for users to be able
          to add this job. The job can be added multiple times (e.g. to send a
          second warning at a later time).</para>

          <para>LAM calculates the expiration date based on the last password
          change and the domain policy.</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_windows1.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>From address</entry>

                  <entry>The email address to set as FROM.</entry>
                </row>

                <row>
                  <entry>Reply-to address</entry>

                  <entry>Optional Reply-to address for email.</entry>
                </row>

                <row>
                  <entry>CC address</entry>

                  <entry>Optional CC mail address.</entry>
                </row>

                <row>
                  <entry>BCC address</entry>

                  <entry>Optional BCC mail address.</entry>
                </row>

                <row>
                  <entry>Subject</entry>

                  <entry>The email subject line. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Text</entry>

                  <entry>The email body text. Supports wildcards, see
                  below.</entry>
                </row>

                <row>
                  <entry>Notification period</entry>

                  <entry>Number of days to notify before password
                  expires.</entry>
                </row>
              </tbody>
            </tgroup>
          </table>

          <para>Wildcards:</para>

          <para>You can enter LDAP attributes as wildcards in the form
          @@ATTRIBUTE_NAME@@. E.g. to add the user's common name use "@@cn@@".
          For the common name it would be "@@cn@@".</para>

          <para>There are also two special wildcards for the expiration date.
          @@EXPIRE_DATE_DDMMYYYY@@ will print the date as e.g. "31.12.2016".
          @@EXPIRE_DATE_YYYYMMDD@@ will print the date as e.g.
          "2016-12-31".</para>
        </section>

        <section>
          <title>Windows: Delete or move expired accounts</title>

          <para>You can automatically delete or move expired accounts.</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_windowsCleanup.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>Delay</entry>

                  <entry>Number of days to wait after the account is
                  expired.</entry>
                </row>

                <row>
                  <entry>Action</entry>

                  <entry>Delete or move accounts</entry>
                </row>

                <row>
                  <entry>Target DN</entry>

                  <entry>Move only: specifies the DN where accounts are
                  moved</entry>
                </row>
              </tbody>
            </tgroup>
          </table>
        </section>

        <section>
          <title>FreeRadius: Delete or move expired accounts</title>

          <para>You can automatically delete or move expired accounts.</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_freeRadiusCleanup.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>Delay</entry>

                  <entry>Number of days to wait after the account is
                  expired.</entry>
                </row>

                <row>
                  <entry>Action</entry>

                  <entry>Delete or move accounts</entry>
                </row>

                <row>
                  <entry>Target DN</entry>

                  <entry>Move only: specifies the DN where accounts are
                  moved</entry>
                </row>
              </tbody>
            </tgroup>
          </table>
        </section>

        <section>
          <title>Qmail: Delete or move expired accounts</title>

          <para>You can automatically delete or move expired accounts. The job
          reads the qmail deletion date of user accounts.</para>

          <screenshot>
            <mediaobject>
              <imageobject>
                <imagedata fileref="images/jobs_qmailCleanup1.png"/>
              </imageobject>
            </mediaobject>
          </screenshot>

          <table>
            <title>Options</title>

            <tgroup cols="2">
              <tbody>
                <row>
                  <entry><emphasis role="bold">Option</emphasis></entry>

                  <entry><emphasis role="bold">Description</emphasis></entry>
                </row>

                <row>
                  <entry>Delay</entry>

                  <entry>Number of days to wait after the account is
                  expired.</entry>
                </row>

                <row>
                  <entry>Action</entry>

                  <entry>Delete or move accounts</entry>
                </row>

                <row>
                  <entry>Target DN</entry>

                  <entry>Move only: specifies the DN where accounts are
                  moved</entry>
                </row>
              </tbody>
            </tgroup>
          </table>
        </section>
      </section>

      <section>
        <title>Job history</title>

        <para>This will show the list of all executed job runs and their
        result.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/jobs4.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>
      </section>
    </section>

    <section id="confTypicalScenarios">
      <title>Typical scenarios</title>

      <para>This is a list of typical scenarios how your LDAP environment may
      look like and how to structure the server profiles for it.</para>

      <section>
        <title>Simple: One LDAP directory managed by a small group of
        admins</title>

        <para>This is the easiest and most common scenario. You want to manage
        a single LDAP server and there is only one or a few admins. In this
        case just create one server profile and you are done. The admins may
        be either specified as a fixed list or by using an LDAP search at
        login time.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/LDAPStructuresSimple.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>
      </section>

      <section>
        <title>Advanced: One LDAP server which is managed by different admin
        groups</title>

        <para>Large organisations may have one big LDAP directory for all
        user/group accounts. But the users are managed by different groups of
        admins (e.g. departments, locations, subsidiaries, ...). The users are
        typically divided into organisational units in the LDAP tree. Admins
        may only manage the users in their part of the tree.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/LDAPStructuresAdvanced.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>

        <para>In this situation it is recommended to create one server profile
        for each admin group (e.g. department). Setup the LDAP suffixes in the
        server profiles to point to the needed organisational units. E.g. use
        ou=people,ou=department1,dc=company,dc=com or
        ou=department1,ou=people,dc=company,dc=com as LDAP suffix for users.
        Do the same for groups, hosts, ... This way each admin group will only
        see its own users. You may want to use LDAP search for the LAM login
        in this scenario. This will prevent that you need to update a server
        profile if the number of admins changes.</para>

        <para><emphasis role="bold">Attention:</emphasis> LAM's feature to
        automatically find free UIDs/GIDs for new users/groups will not work
        in this case. LAM uses the user/group suffix to search for already
        assigned UIDs/GIDs. As an alternative you can specify different
        UID/GID ranges for each department. Then the UIDs/GIDs will stay
        unique for the whole directory.</para>
      </section>

      <section>
        <title>Multiple LDAP servers</title>

        <para>You can manage as many LDAP servers with LAM as you wish. This
        scenario is similar to the advanced scenario above. Just create one
        server profile for each LDAP server.</para>

        <screenshot>
          <mediaobject>
            <imageobject>
              <imagedata fileref="images/LDAPStructuresMultiServer.png"/>
            </imageobject>
          </mediaobject>
        </screenshot>
      </section>

      <section>
        <title>Single LDAP directory with lots of users (&gt;10 000)</title>

        <para>LAM was tested to work with 10 000 users. If you have a lot more
        users then you have basically two options.</para>

        <itemizedlist>
          <listitem>
            <para>Divide your LDAP tree in organisational units: This is
            usually the best performing option. Put your accounts in several
            organisational units and setup LAM as in the advanced scenario
            above.</para>
          </listitem>

          <listitem>
            <para>Increase memory limit: Increase the memory_limit parameter
            in your php.ini. This will allow LAM to read more entries. But
            this will slow down the response times of LAM.</para>
          </listitem>
        </itemizedlist>
      </section>
    </section>
  </section>
</chapter>
