LDAPAccountManager/lam/docs/manual-sources/chapter-selfService.xml

2011 lines
61 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<chapter id="a_selfService">
<title>Self service (LAM Pro)</title>
<section>
<title>Preparations</title>
<section id="openldapAcls">
<title>OpenLDAP ACLs</title>
<para>By default only a few administrative users have write access to
the LDAP database. Before your users may change their settings you must
allow them to change their LDAP data.</para>
<para>Hint: The ACLs below are not required if you decide to run all
operations as the LDAP bind user (option "Use for all
operations").</para>
<para>This can be done by adding ACLs to your slapd.conf or
slapd.d/cn=config/olcDatabase={1}bdb.ldif which look similar to
these:</para>
<para><emphasis role="bold">access to</emphasis></para>
<para><emphasis role="bold"> attrs=userPassword</emphasis></para>
<para><emphasis role="bold"> by self write</emphasis></para>
<para><emphasis role="bold"> by anonymous auth</emphasis></para>
<para><emphasis role="bold"> by * none</emphasis></para>
<literallayout>
</literallayout>
<para><emphasis role="bold">access to</emphasis></para>
<para><emphasis role="bold">
attrs=mail,sn,givenName,telephoneNumber,mobile,facsimileTelephoneNumber,street,postalAddress,postOfficeBox,postalCode,roomNumber,shadowLastChange,passwordSelfResetAnswer,passwordSelfResetQuestion,passwordSelfResetBackupMail</emphasis></para>
<para><emphasis role="bold"> by self write</emphasis></para>
<para><emphasis role="bold"> by * read</emphasis></para>
<para>If you do not want them to change all attributes then reduce the
list to fit your needs. Some modules may require additional LDAP
attributes. You can use the tree view to get the technical attribute
names e.g. by selecting an user account.</para>
<para>Usually, the slapd.conf file is located in /etc/ldap or
/etc/openldap.</para>
</section>
<section>
<title>Other LDAP servers</title>
<para>There exist many LDAP implementations. If you do not use OpenLDAP
you need to write your own ACLs. Please check the manual of your LDAP
server for instructions.</para>
</section>
</section>
<section>
<title>Creating a self service profile</title>
<para>A self service profile defines what input fields your users see and
some other general settings like the login caption.</para>
<para>When you go to the LAM configuration page you will see the self
service link at the bottom. This will lead you to the self service
configuration pages</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf1.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Now we need to create a new self service profile. Click on the link
to manage the self service profiles.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf2.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Specify a name for the new profile and enter your master
configuration password (default is "lam") to save the profile.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf3.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Now go back to the profile login and enter your master configuration
password to edit your new profile.</para>
</section>
<section>
<title>Edit your new profile</title>
<section id="selfServiceBasicSettings">
<title>General settings</title>
<para>On top of the page you see the link to the user login page. Copy
this link address and give it to your users.</para>
<para>Below the link you can specify several options.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf4.png"/>
</imageobject>
</mediaobject>
</screenshot>
<table border="0">
<title>General options</title>
<tgroup cols="2">
<tbody>
<row>
<entry>Server address</entry>
<entry>The address of your LDAP server. For LDAP+SSL use
"ldaps://myserver"</entry>
</row>
<row>
<entry>Activate TLS</entry>
<entry>Activates TLS encryption. Please note that this cannot be
combined with LDAP+SSL ("ldaps://").</entry>
</row>
<row>
<entry>LDAP suffix</entry>
<entry>The part of the LDAP tree where LAM should search for
users</entry>
</row>
<row>
<entry>LDAP search attribute</entry>
<entry>Here you can specify if your users can login with user
name + password, email + password or other attributes.</entry>
</row>
<row>
<entry>Follow referrals</entry>
<entry>By default LAM will not follow LDAP referrals. This is ok
for most installations. If you use LDAP referrals please
activate the referral option in advanced settings.</entry>
</row>
<row>
<entry>LDAP user + password</entry>
<entry>The DN and password which is used to search for users in
the LDAP database. It is sufficient if this DN has only read
rights. If you leave these fields empty LAM will try to connect
anonymously.</entry>
</row>
<row>
<entry>Use for all operations</entry>
<entry>By default LAM will use the credentials of the user that
logged in to self service for read/modify operations. If you
select this box then the connection user specified before will
be used instead. Please note that this can be a security risk
because the user requires write access to all users. You need to
make sure that your LAM server is well protected.</entry>
</row>
<row>
<entry>Additional LDAP filter</entry>
<entry>Use this to enter an additional LDAP filter (e.g.
"(objectClass=passwordSelfReset)") to reduce the number of
accounts who may use self service.</entry>
</row>
<row>
<entry>HTTP authentication</entry>
<entry>You can enable HTTP authentication for your users. This
way the web server is responsible to authenticate your users.
LAM will use the given user name + password for the LDAP login.
To setup HTTP authentication in Apache please see this <ulink
url="http://httpd.apache.org/docs/2.2/howto/auth.html">link</ulink>.</entry>
</row>
<row>
<entry>Default language</entry>
<entry>This language is preselected on login.</entry>
</row>
<row>
<entry>Enforce language</entry>
<entry>Disables language selection and uses default
language.</entry>
</row>
<row>
<entry>Time zone</entry>
<entry>Please provide your time zone.</entry>
</row>
<row>
<entry>Base URL</entry>
<entry>Please enter the base URL of your webserver (e.g.
https://www.example.com). This is used to generate links in
emails for password self reset and user self
registration.</entry>
</row>
<row>
<entry>Login attribute label</entry>
<entry>This is the description for the LDAP search attribute.
Set it to something which your users are familiar with.</entry>
</row>
<row>
<entry>Password field label</entry>
<entry>This text is placed as label for the password field on
the login page. LAM will use "Password" if you do not enter any
text.</entry>
</row>
<row>
<entry>Login caption</entry>
<entry>This text is displayed on the login page inside the login
mask.</entry>
</row>
<row>
<entry>Login footer</entry>
<entry>This text is displayed on the login page below the login
mask.</entry>
</row>
<row>
<entry>Main page caption</entry>
<entry>This text is displayed on the self service main page
where your users change their data.</entry>
</row>
<row>
<entry>Main page footer</entry>
<entry>This text is displayed as footer on the self service main
page where your users change their data.</entry>
</row>
<row>
<entry>Page header</entry>
<entry>This HTML code will be placed on top of all self service
pages. E.g. you can use this to place your custom logo. Any HTML
code is permitted.</entry>
</row>
<row>
<entry>Base color</entry>
<entry>Here you can change the background color for the user
pages.</entry>
</row>
<row>
<entry>Additional CSS links</entry>
<entry>Here you can specify additional CSS links to change the
layout of the self service pages. This is useful to adapt them
to your corporate design. Please enter one link per
line.</entry>
</row>
</tbody>
</tgroup>
</table>
<para/>
<section>
<title>2-factor authentication</title>
<para>LAM supports 2-factor authentication for your users. This means
the user will not only authenticate by user+password but also with
e.g. a token generated by a mobile device. This adds more security
because the token is generated on a physically separated device
(typically mobile phone).</para>
<para>The token is validated by a second application. LAM currently
supports:</para>
<itemizedlist>
<listitem>
<para><ulink
url="https://www.privacyidea.org/">privacyIdea</ulink></para>
</listitem>
<listitem>
<para><ulink url="https://www.yubico.com/">YubiKey</ulink></para>
</listitem>
<listitem>
<para><ulink url="https://duo.com/">Duo</ulink></para>
</listitem>
</itemizedlist>
<para>privacyIDEA:</para>
<itemizedlist>
<listitem>
<para>Base URL: please enter the URL of your privacyIDEA
instance</para>
</listitem>
<listitem>
<para>User name attribute: please enter the LDAP attribute name
that contains the user ID (e.g. "uid")</para>
</listitem>
<listitem>
<para>Optional: By default LAM will enforce to use a token and
reject users that did not setup one. You can set this check to
optional. But if a user has setup a token then this will always be
required.</para>
</listitem>
<listitem>
<para>Disable certificate check: This should be used on
development instances only. It skips the certificate check when
connecting to verification server.</para>
</listitem>
</itemizedlist>
<para>YubiKey:</para>
<itemizedlist>
<listitem>
<para>Base URL: please enter the URL of your YubiKey verfication
server. For YubiKey cloud this is
"https://api.yubico.com/wsapi/2.0/verify". If you run a custom
verification API such as yubiserver then enter its URL (e.g.
http://www.example.com:8000/wsapi/2.0/verify). The URL needs to
end with "/wsapi/2.0/verify".</para>
</listitem>
<listitem>
<para>Client id: this is only required for YubiKey cloud. You can
register here: https://upgrade.yubico.com/getapikey/</para>
</listitem>
<listitem>
<para>Secret key: this is only required for YubiKey cloud. You can
register here: https://upgrade.yubico.com/getapikey/</para>
</listitem>
<listitem>
<para>Optional: By default LAM will enforce to use a token and
reject users that did not setup one. You can set this check to
optional. But if a user has setup a token then this will always be
required.</para>
</listitem>
<listitem>
<para>Disable certificate check: This should be used on
development instances only. It skips the certificate check when
connecting to verification server.</para>
</listitem>
</itemizedlist>
<para>Duo:</para>
<para>This requires to register a new "Web SDK" application in your
Duo admin panel.</para>
<itemizedlist>
<listitem>
<para>User name attribute: please enter the LDAP attribute name
that contains the user ID (e.g. "uid").</para>
</listitem>
<listitem>
<para>Base URL: please enter the API-URL of your Duo instance
(e.g. api-12345.duosecurity.com).</para>
</listitem>
<listitem>
<para>Client id: please enter your integration key.</para>
</listitem>
<listitem>
<para>Secret key: please enter your secret key.</para>
</listitem>
</itemizedlist>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf7.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>After logging in with user + password LAM will ask for the 2nd
factor. If the user has setup multiple factors then he can choose one
of them.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf8.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
<section>
<title>Captcha</title>
<para>LAM Pro can optionally display a captcha to verify that logins
are not from robots. The supported captcha provider is Google
reCAPTCHA. You will need the site and secret key for your domain. They
can be retrieved from here: <ulink
url="https://www.google.com/recaptcha">https://www.google.com/recaptcha</ulink></para>
<para>Please note that your web server must be able to access
"https://www.google.com/recaptcha/api/siteverify" to verify the
captchas. Captchas will be displayed when you tick the chekbox to
secure login with a captcha.</para>
<mediaobject>
<imageobject>
<imagedata fileref="images/selfServiceCaptcha.png"/>
</imageobject>
</mediaobject>
<para/>
</section>
</section>
<section>
<title>Page layout</title>
<para>Here you can specify what input fields your users can see. It is
also possible to group several input fields.</para>
<para>Please use the arrow signs to change the order of the
fields/groups.</para>
<para>You may also set some fields as read-only for your users. This can
be done by clicking on the lock symbol. Read-only fields can be used to
show your users additional data on the self service page that must not
be changed by themselves (e.g. first/last name).</para>
<para>Sometimes, you may want to set a custom label for an input field.
Click on the edit icon to set your own label text (Personal: Department
is relabeled as "Business unit" here).</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf5.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Possible input fields</emphasis></para>
<para>This is a list of input fields you may add to the self service
page.</para>
<table>
<title>Self service fields</title>
<tgroup cols="3">
<tbody>
<row>
<entry align="center"><emphasis role="bold">Account
type</emphasis></entry>
<entry align="center"><emphasis
role="bold">Option</emphasis></entry>
<entry align="center"><emphasis
role="bold">Description</emphasis></entry>
</row>
<row>
<entry><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_ppolicy.png"/>
</imageobject>
</inlinemediaobject> Account locking</entry>
<entry>Password expiration</entry>
<entry>Read only value of password expiration date</entry>
</row>
<row>
<entry morerows=""><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_asterisk.png"/>
</imageobject>
</inlinemediaobject> Asterisk (voicemail)</entry>
<entry>Sync Asterisk password with Unix password</entry>
<entry>This is a hidden field. It will update the Asterisk
password each time the Unix password is changed.</entry>
</row>
<row>
<entry><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_groupOfNames.png"/>
</imageobject>
</inlinemediaobject>Group of names</entry>
<entry>Group memberships (read-only)</entry>
<entry/>
</row>
<row>
<entry><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_heimdal.png"/>
</imageobject>
</inlinemediaobject> Kerberos</entry>
<entry>Sync Kerberos password with Unix password</entry>
<entry>This is a hidden field. It will update the Kerberos
password each time the Unix password is changed.</entry>
</row>
<row>
<entry morerows="1"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_kolab.png"/>
</imageobject>
</inlinemediaobject> Kolab</entry>
<entry>Delegates</entry>
<entry>Allows to manage delegate permissions</entry>
</row>
<row>
<entry>Invitation policy</entry>
<entry>Invitation policy management</entry>
</row>
<row>
<entry><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_ssh.png"/>
</imageobject>
</inlinemediaobject> Password policy</entry>
<entry>Last password change</entry>
<entry>read-only</entry>
</row>
<row>
<entry morerows="2"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_ssh.png"/>
</imageobject>
</inlinemediaobject> Password self reset</entry>
<entry>Question</entry>
<entry>Security question selection</entry>
</row>
<row>
<entry>Answer</entry>
<entry>Security answer</entry>
</row>
<row>
<entry>Backup email</entry>
<entry>(External) backup email address that has no relation to
user password.</entry>
</row>
<row>
<entry morerows="27"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_user.png"/>
</imageobject>
</inlinemediaobject> Personal</entry>
<entry>Business category</entry>
<entry/>
</row>
<row>
<entry>Car license</entry>
<entry/>
</row>
<row>
<entry>Department</entry>
<entry/>
</row>
<row>
<entry>Description</entry>
<entry/>
</row>
<row>
<entry>Email address</entry>
<entry/>
</row>
<row>
<entry>Fax number</entry>
<entry/>
</row>
<row>
<entry>First name</entry>
<entry/>
</row>
<row>
<entry>Home telephone number</entry>
<entry/>
</row>
<row>
<entry>Initials</entry>
<entry/>
</row>
<row>
<entry>Job title</entry>
<entry/>
</row>
<row>
<entry>Last name</entry>
<entry/>
</row>
<row>
<entry>Location</entry>
<entry/>
</row>
<row>
<entry>Mobile number</entry>
<entry/>
</row>
<row>
<entry>Office name</entry>
<entry/>
</row>
<row>
<entry>Organisation</entry>
<entry/>
</row>
<row>
<entry>Organisational unit</entry>
<entry/>
</row>
<row>
<entry>Photo</entry>
<entry>Shows the user photo if set. The user may also remove the
photo or upload a new one.</entry>
</row>
<row>
<entry>Postal address</entry>
<entry/>
</row>
<row>
<entry>Postal code</entry>
<entry/>
</row>
<row>
<entry>Post office box</entry>
<entry/>
</row>
<row>
<entry>Registered address</entry>
<entry/>
</row>
<row>
<entry>Room number</entry>
<entry/>
</row>
<row>
<entry>State</entry>
<entry/>
</row>
<row>
<entry>Street</entry>
<entry/>
</row>
<row>
<entry>Telephone number</entry>
<entry/>
</row>
<row>
<entry>User certificates</entry>
<entry>Upload of user certificates in PEM or DER format</entry>
</row>
<row>
<entry>User name</entry>
<entry/>
</row>
<row>
<entry>Web site</entry>
<entry/>
</row>
<row>
<entry morerows="1"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_mailAlias.png"/>
</imageobject>
</inlinemediaobject> Mail routing</entry>
<entry>Local address (read-only)</entry>
<entry/>
</row>
<row>
<entry>Mail routing address (read-only)</entry>
<entry/>
</row>
<row>
<entry morerows="4"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_samba.png"/>
</imageobject>
</inlinemediaobject> Samba 3</entry>
<entry>Password</entry>
<entry>Input field to set a new NT/LM password. The attribute
"sambaPwdLastSet" is updated if it existed before.</entry>
</row>
<row>
<entry>Sync Samba LM password with Unix password</entry>
<entry>This is a hidden field. It will update the Samba LM
password each time the Unix password is changed.</entry>
</row>
<row>
<entry>Sync Samba NT password with Unix password</entry>
<entry>This is a hidden field. It will update the Samba NT
password each time the Unix password is changed.</entry>
</row>
<row>
<entry>Update attribute "sambaPwdLastSet" on password
change</entry>
<entry>Updates the password timestamp when password is
synchronized with Unix.</entry>
</row>
<row>
<entry>Last password change (read-only)</entry>
<entry>Displays the date and time of the user's last password
change.</entry>
</row>
<row>
<entry morerows="1"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_ssh.png"/>
</imageobject>
</inlinemediaobject> Shadow</entry>
<entry>Account expiration date (read-only)</entry>
<entry/>
</row>
<row>
<entry>Last password change (read-only)</entry>
<entry>Displays the date and time of the user's last password
change (Unix).</entry>
</row>
<row>
<entry morerows="10"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_samba.png"/>
</imageobject>
</inlinemediaobject> Windows</entry>
<entry>Password</entry>
<entry>Change the user's password</entry>
</row>
<row>
<entry>Location</entry>
<entry/>
</row>
<row>
<entry>Mail alias (read-only)</entry>
<entry/>
</row>
<row>
<entry>Office name</entry>
<entry/>
</row>
<row>
<entry>Postal code</entry>
<entry/>
</row>
<row>
<entry>Post office box</entry>
<entry/>
</row>
<row>
<entry>Proxy-Addresses (read-only)</entry>
<entry/>
</row>
<row>
<entry>State</entry>
<entry/>
</row>
<row>
<entry>Street</entry>
<entry/>
</row>
<row>
<entry>Telephone number</entry>
<entry/>
</row>
<row>
<entry>Web site</entry>
<entry/>
</row>
<row>
<entry morerows="4"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_unix.png"/>
</imageobject>
</inlinemediaobject> Unix</entry>
<entry>Common name</entry>
<entry/>
</row>
<row>
<entry>Group memberships (read-only)</entry>
<entry/>
</row>
<row>
<entry>Login shell</entry>
<entry/>
</row>
<row>
<entry>Password</entry>
<entry>This is also the source for several password
synchronization options.</entry>
</row>
<row>
<entry>Sync Unix password with Windows password</entry>
<entry>This is a hidden field. It will update the Unix password
each time the Windows password is changed.</entry>
</row>
<row>
<entry morerows="1"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_kopano.png"/>
</imageobject>
</inlinemediaobject>Kopano</entry>
<entry>"Send as" privileges</entry>
<entry>Define user who may send mails as this user</entry>
</row>
<row>
<entry>Email aliases</entry>
<entry>Email aliases</entry>
</row>
<row>
<entry morerows="1"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_zarafa.png"/>
</imageobject>
</inlinemediaobject> Zarafa</entry>
<entry>"Send as" privileges</entry>
<entry>Define user who may send mails as this user</entry>
</row>
<row>
<entry>Email aliases</entry>
<entry>Email aliases</entry>
</row>
<row>
<entry morerows="3"><inlinemediaobject>
<imageobject>
<imagedata fileref="images/schema_pykota.png"/>
</imageobject>
</inlinemediaobject> PyKota</entry>
<entry>Balance (read-only)</entry>
<entry>Current balance for printing</entry>
</row>
<row>
<entry>Total paid (read-only)</entry>
<entry>Total money paid</entry>
</row>
<row>
<entry>Payment history</entry>
<entry>History of user payments</entry>
</row>
<row>
<entry>Job history</entry>
<entry>History of printed jobs</entry>
</row>
</tbody>
</tgroup>
</table>
</section>
<section>
<title>Module settings</title>
<para>This allows to configure some module specific options (e.g. custom
scripts or password hash type).</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/conf6.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
<section>
<title>Samba 3</title>
<para>LAM Pro can check the password history and minimum age for Samba 3
password changes. In this case please provide the LDAP suffix where your
Samba 3 domain(s) are stored.</para>
<para>If you leave the field empty then no history and age checks will
be done.</para>
<para>Password history: depending on your LDAP server you might need
ascending or descending order. Just switch the setting if the password
history is not correctly updated.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/selfServiceSambaDomains.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
<section id="PasswordSelfReset">
<title>Password self reset</title>
<para><emphasis role="bold">Schema installation</emphasis></para>
<para>Please install the LDAP schema as described <link
linkend="a_passwordSelfResetSchema">here</link>.</para>
<para><emphasis role="bold">Settings</emphasis></para>
<para>You can allow your users to reset their passwords themselves. This
will reduce your administrative costs for cases where users forget their
passwords.</para>
<para>To enable this feature please activate the checkbox "Enable
password self reset link".</para>
<para><emphasis role="bold">Hint:</emphasis> Plese note that LAM Pro
uses security questions by default. Activate confirmation mails and then
deactivate security questions if you want to use only email
validation.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset1.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>You can now configure the minimum answer length for password reset
answers. This is checked when you allow you users to specify their
answers via the self service. Additionally, you can specify the text of
the password reset link (default: "Forgot password?"). The link is
displayed below the password field on the self service login
page.</para>
<para>Next, please enter the DN and password of an LDAP entry that is
allowed to reset the passwords. This entry needs write access to the
attributes shadowLastChange, pwdAccountLockedTime and userPassword. It
also needs read access to uid, mail, passwordSelfResetQuestion and
passwordSelfResetAnswer. Please note that LAM Pro saves the password on
your server file system. Therefore, it is required to protect your
server against unauthorised access.</para>
<para>Please also specify the list of password reset questions that the
user can choose.</para>
<para>Please note that self service and LAM admin interface are
separated functionalities. You need to specify the list of possible
security questions in both self service profile(s) and server
profile(s).</para>
<literallayout> </literallayout>
<para>You can inform your users via mail about their password change.
The mail can include the new password by using the special wildcard
"@@newPassword@@". Additionally, you may want to insert other wildcards
that are replaced by the corresponding LDAP attributes. E.g. "@@uid@@"
will be replaced by the user name. Please see <link
linkend="mailEOL">email format option</link> in case of broken mails.
See <link linkend="mailSetup">here</link> for setting up your SMTP
server.</para>
<literallayout> </literallayout>
<para>LAM Pro can send your users an email with a confirmation link to
validate their email address. Of course, this should only be used if the
email account is independent from the user password (e.g. at external
provider) or you use the backup email address feature. The mail body
must include the confirmation link by using the special wildcard
"@@resetLink@@". Additionally, you may want to insert other wildcards
that are replaced by the corresponding LDAP attributes. E.g. "@@uid@@"
will be replaced by the user name.</para>
<para>There is also an option to skip the security question at all if
email verification is enabled. In this case the password can be reset
directly after clicking on the confirmation link. Please handle with
care since anybody with access to the user's mail account can reset the
password.</para>
<para><emphasis role="bold">Captcha support</emphasis></para>
<para>LAM Pro can optionally display a captcha to verify that password
resets are not from robots. The supported captcha provider is Google
reCAPTCHA. You will need the site and secret key for your domain. This
is setup on tab "General settings". They can be retrieved from here:
<ulink
url="https://www.google.com/recaptcha">https://www.google.com/recaptcha</ulink></para>
<para>Please note that your web server must be able to access
"https://www.google.com/recaptcha/api/siteverify" to verify the
captchas. Captchas will be displayed when you tick the chekbox to use a
captcha.</para>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset10.png"/>
</imageobject>
</mediaobject>
<para><emphasis role="bold">Troubleshooting:</emphasis></para>
<para>1. You get messages like "Unable to find user account."</para>
<para>This can have multiple reasons:</para>
<itemizedlist>
<listitem>
<para>security questions enabled but no security question and/or
answer set for this user</para>
</listitem>
<listitem>
<para>user name + email combination does not exist</para>
</listitem>
<listitem>
<para>no connection to LDAP server</para>
</listitem>
</itemizedlist>
<para>Turn on logging in LAM's main configuration settings. The exact
reason is logged on notice level.</para>
<para>2. You do not see security question and answer fields when logged
into self service.</para>
<para>Probably, the user does not have the object class
"passwordSelfReset" set. You can do this in admin interface. If you have
multiple users to change then use the <link
linkend="toolMultiEdit">Multi Edit Tool</link> to add the object
class.</para>
<para><emphasis role="bold">New fields for self service
page</emphasis></para>
<para>There are special fields that you may put on the self service page
for your users. These fields allow them to change the reset questions
and its answers. It is also possible to set a backup email address to
reset passwords with an external email address.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset2.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>This is an example how can be presented to your users on the self
service page:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset3.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Password reset link</emphasis></para>
<para>After activating the password self reset feature there will be a
new link on the self service login page. The text can be configured as
described above (default: "Forgot password?").</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset4.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>When a user clicks on the link then he will be asked for
identification with his user name and email address.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset5.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>LAM Pro will use this information to find the correct LDAP entry
of this user. It then displays the user's security questions and input
fields for his new password. If the answer is correct then the new
password will be set. Additionally, pwdAccountLockedTime will be removed
and shadowLastChange updated to the current time if existing.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/passwordSelfReset6.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
<section>
<title>User self registration</title>
<para>With LAM Pro your users can create their own accounts if you like.
LAM Pro will display an additional link on the self service login page
that allows you users to create a new account including email validation
(see <link linkend="mailSetup">here</link> for setting up your SMTP
server).</para>
<para>You enable this feature in your self service profile. Just
activate the checkbox "Enable self registration link".</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/accountRegistration1.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Options:</emphasis></para>
<para><emphasis>Link text:</emphasis> This is the label for the link to
the self registration. If empty "Register new account" will be
used.</para>
<para><emphasis>Admin DN and password:</emphasis> Please enter the LDAP
DN and its password that should be used to create new users. This DN
also needs to be able to do LDAP searches by uid in the self service
part of your LDAP tree.</para>
<para><emphasis>Object classes:</emphasis> This is a list of object
classes that are used to build the new user accounts. Please enter one
object class in each line. If you use LAM Pro password self reset
feature then do not forget to add "passwordSelfReset" here.</para>
<para/>
<para><emphasis>Attributes:</emphasis> This is a list of additional
attributes that the user can enter. Please note that user name, password
and email address (attribute "mail") are mandatory anyway and need not
be specified. Just in case you use the legacy attribute "email" for
account it needs to be specified (attribute "mail" will then not be
shown).</para>
<para>Each line represents one LDAP attribute. The settings are
separated by "::". The first setting specifies the field type. The
second setting is the LDAP attribute name. Depending on the field type
you can enter additional options:</para>
<table>
<title/>
<tgroup cols="6">
<tbody>
<row>
<entry><emphasis role="bold">Description</emphasis></entry>
<entry><emphasis role="bold">Type</emphasis></entry>
<entry><emphasis role="bold">Attribute name</emphasis></entry>
<entry><emphasis role="bold">First option</emphasis></entry>
<entry><emphasis role="bold">Second option</emphasis></entry>
<entry><emphasis role="bold">Third option</emphasis></entry>
</row>
<row>
<entry>An optional input field that is displayed on the
registration page.</entry>
<entry>optional</entry>
<entry>e.g. "givenName"</entry>
<entry>Label that is displayed on page</entry>
<entry>optional regular expression for validation (e.g.
"/^[0-9a-zA-Z]+$/")</entry>
<entry>validation message if value does not match validation
expression</entry>
</row>
<row>
<entry>A required input field that is displayed on the
registration page. Self registration cannot be done if such a
field is left empty by the user.</entry>
<entry>required</entry>
<entry>e.g. "sn"</entry>
<entry>Label that is displayed on page</entry>
<entry>optional regular expression for validation (e.g.
"/^[0-9a-zA-Z]+$/")</entry>
<entry>validation message if value does not match validation
expression</entry>
</row>
<row>
<entry>Constant attribute value, not visible for the user. Can
be used to set some initial values or data that must not be
edited by the user.</entry>
<entry>constant</entry>
<entry>e.g. "homeDirectory"</entry>
<entry>attribute value, supports wirldcards to insert other
attribute values (e.g. "@@uid@@")</entry>
<entry/>
<entry/>
</row>
<row>
<entry>Auto-numbering for attributes such as uidNumber. Will do
a search for attribute values in the given range and use highest
value + 1.</entry>
<entry>autorange</entry>
<entry>e.g. uidNumber</entry>
<entry>LDAP search base, e.g.
ou=people,dc=company,dc=com</entry>
<entry>Minimum value, e.g. 1000</entry>
<entry>Maximum value, e.g. 2000</entry>
</row>
</tbody>
</tgroup>
</table>
<para>For a syntax description of validation expressions see <ulink
url="http://perldoc.perl.org/perlre.html">here</ulink>. Validation is
optional, you can leave these options blank.</para>
<para><emphasis role="bold">Example:</emphasis></para>
<para>optional::givenName::First name::/^[[:alnum:] ]+$/u::Please enter
a valid first name.</para>
<para>required::sn::Last name::/^[[:alnum:] ]+$/u::Please enter a valid
last name.</para>
<para>constant::homeDirectory::/home/@@uid@@</para>
<para>autorange::uidNumber::ou=people,dc=company,dc=com::10000::20000</para>
<para>If you use the object class "inetOrgPerson" and do not provide the
"cn" attribute then LAM will set it to the user name value.</para>
<literallayout>
</literallayout>
<para>Please note that only simple input boxes are supported for account
registration. The user may log in to self service when his account was
created to manage all his attributes.</para>
<literallayout>
</literallayout>
<para><emphasis role="bold">Captcha support</emphasis></para>
<para>LAM Pro can optionally display a captcha to verify that
registrations are not from robots. The supported captcha provider is
Google reCAPTCHA. You will need the site and secret key for your domain.
This is setup on tab "General settings". They can be retrieved from
here: <ulink
url="https://www.google.com/recaptcha">https://www.google.com/recaptcha</ulink></para>
<para>Please note that your web server must be able to access
"https://www.google.com/recaptcha/api/siteverify" to verify the
captchas. Captchas will be displayed when you tick the chekbox to use a
captcha.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/accountRegistration4.png"/>
</imageobject>
</mediaobject>
</screenshot>
<literallayout>
</literallayout>
<para><emphasis role="bold">User view:</emphasis></para>
<para>The user can register by clicking on a link on the self service
login page:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/accountRegistration2.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Here he can insert the data that you specified in the self service
profile:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/accountRegistration3.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>LAM will then send him an email with a validation link that is
valid for 24 hours. When he clicks on this link then the account will be
created in the self service user suffix. The DN will look like this:
<emphasis>uid=&lt;user name&gt;,...</emphasis></para>
<para>Please see <link linkend="mailEOL">email format option</link> in
case of broken mails.</para>
</section>
<section>
<title>Custom fields</title>
<para>This module allows you to manage LDAP attributes that are not
covered by the other LAM modules (e.g. if you use custom LDAP schemas).
You can fully define how your input fields look like:</para>
<itemizedlist>
<listitem>
<para>Label</para>
</listitem>
<listitem>
<para>LDAP attribute name</para>
</listitem>
<listitem>
<para>Unique name for field</para>
</listitem>
<listitem>
<para>Help text</para>
</listitem>
<listitem>
<para>Read-only display</para>
</listitem>
<listitem>
<para>Field type: text, password, text area, checkbox, radio
buttons, select list, file upload</para>
</listitem>
<listitem>
<para>Validation via regular expression</para>
</listitem>
<listitem>
<para>Error message if validation fails</para>
</listitem>
</itemizedlist>
<para>To create custom fields for the Self Service please edit your Self
Service profile and switch to tab "Module settings". Here you can add a
new field. Simply fill the fields and press on "Add".</para>
<para>Please note that the field name cannot be changed later. It is the
unique ID for this field.</para>
<para>After you created your fields please press on "Sync fields with
page layout". Now you can switch to tab "Page layout" and add your new
fields like any other standard field.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields1.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Examples for fields and their representation in Self
Service:</para>
<para><emphasis role="bold">Text field:</emphasis></para>
<para>Text fields allow to specify a <link
linkend="customFields_validation_expressions">validation
expression</link> and error message.</para>
<para>You can also enable auto-completion. In this case LAM will search
all accounts for the given attribute and provide auto-completion hints
when the user edits this field. This should only be used if there is a
limited number of different values for this attribute.</para>
<para>In case your field is a date value you can show a calendar for
easy editing.</para>
<para>Example calendar formats:</para>
<itemizedlist>
<listitem>
<para>dd.mm.yy: 31.12.2016</para>
</listitem>
<listitem>
<para>yy-mm-dd: 2016-12-31</para>
</listitem>
<listitem>
<para>d M, y: 31 Dec, 16</para>
</listitem>
<listitem>
<para>d MM, y: 31 December, 2016</para>
</listitem>
</itemizedlist>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields2.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields3.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Password field:</emphasis></para>
<para>You can also manage custom password fields. LAM Pro will display
two fields where the user must enter the same password. You can hash the
password if needed.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields4.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields5.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Text area:</emphasis></para>
<para>This adds a multi-line field. The options are similar to text
fields. Additionally, you can set the size with the number of columns
and rows.</para>
<para>Please note that the <link
linkend="customFields_validation_expressions">validation
expression</link> should be set to multi-line. This is done by adding
"m" at the end.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields6.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields7.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Checkbox:</emphasis></para>
<para>Sometimes you may want to allow only yes/no values for your LDAP
attributes. This can be represented by a checkbox. You can specify the
values for checked and unchecked. The default value is set if the LDAP
attribute has no value.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields8.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields9.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Radio buttons:</emphasis></para>
<para>This displays a list of radio buttons where the user can select
one value.</para>
<para>You can specify a mapping of LDAP attribute values and their
display (label) on the Self Service page. To add more mapping fields
please press "Add more mapping fields".</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields10.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields11.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para><emphasis role="bold">Select list:</emphasis></para>
<para>Select lists allow the user to select a value in a large list of
options. The definition of the possible values and their display is
similar to radio buttons.</para>
<para>You can also allow multiple values.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields12.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation in Self Service:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields13.png"/>
</imageobject>
</mediaobject>
</screenshot>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields18.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>LDAP search select list</para>
<para>This is similar to "Select list" but the option are read from
LDAP. You can use this to define e.g. a DN selection list. Multiple
values are supported.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields26.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>LDAP suffix: The LDAP DN that is used as starting point to search
for LDAP entries.</para>
<para>LDAP filter: Only LDAP entries that match this filter will be
used. If all entries should be used then use "(objectclass=*)".</para>
<para>Attribute name: The values of this attribute will be used to build
the selection list.</para>
<para>Presentation:</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields27.png"/>
</imageobject>
</mediaobject>
</screenshot>
<literallayout>
</literallayout>
<para><emphasis role="bold">Constant value</emphasis></para>
<para>This will set the attribute to a constant value. You can also
specify wildcards to inject other attribute's values.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields28.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Wildcards:</para>
<itemizedlist>
<listitem>
<para>%attribute%: attribute value</para>
</listitem>
<listitem>
<para>@attribute@: first character of attribute</para>
</listitem>
<listitem>
<para>?attribute?: first character of attribute in lower case</para>
</listitem>
<listitem>
<para>!attribute!: first character of attribute in upper case</para>
</listitem>
<listitem>
<para>??attribute??: attribute in lower case</para>
</listitem>
<listitem>
<para>!!attribute!!: attribute in upper case</para>
</listitem>
<listitem>
<para>((attribute)): space if attribute is set</para>
</listitem>
<listitem>
<para>§attribute|;§; attribute values separted by ";" (you can set
other separators if you want)</para>
</listitem>
</itemizedlist>
<para>Examples for attributes gn="Steve", sn="Miller" and
memberUid=("user1", "user2") (specified value -&gt; resulting LDAP
value):</para>
<table border="1">
<caption/>
<tr>
<th>Constant value</th>
<th>Resulting LDAP value</th>
</tr>
<tr>
<td>my constant</td>
<td>my constant</td>
</tr>
<tr>
<td>%gn%</td>
<td>Steve</td>
</tr>
<tr>
<td>%gn%((gn))%sn%</td>
<td>Steve Miller (would be "Miller" if gn is empty)</td>
</tr>
<tr>
<td>§memberUid|, §</td>
<td>user1, user2</td>
</tr>
</table>
<para/>
<para>Presentation:</para>
<para>The LDAP value will be shown as text.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields29.png"/>
</imageobject>
</mediaobject>
</screenshot>
<literallayout>
</literallayout>
<para><emphasis role="bold">File upload:</emphasis></para>
<para>This is used for binary data. You can restrict uploaded data to a
given file extension and set the maximum file size.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields23.png"/>
</imageobject>
</mediaobject>
</screenshot>
<para>Presentation:</para>
<para>The uploaded data may also be downloaded via LAM.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/customFields24.png"/>
</imageobject>
</mediaobject>
</screenshot>
<literallayout>
</literallayout>
<para id="customFields_validation_expressions"><emphasis
role="bold">Validation expressions:</emphasis></para>
<para>The validation expressions follow the standard of <ulink
url="http://perldoc.perl.org/perlre.html">Perl regular
expressions</ulink>. They start and end with a "/". The beginning of a
line is specified by "^" and the end by "$".</para>
<para>Examples:</para>
<para>/^[a-z0-9]+$/ allows small letters and numbers. The value must not
be empty ("+").</para>
<para>/^[a-z0-9]+$/i allows small and capital letters ("i" at the end
means ignore case) and numbers. The value must not be empty
("+").</para>
<para>Special characters that must be escaped with "\": "\", ".", "(",
")"</para>
<para>E.g. /^[a-z0-9\.]$/i</para>
</section>
</section>
<section>
<title>Adapt the self service to your corporate design</title>
<para>LAM Pro allows you to integrate customs CSS style definitions and
design the header of all self service pages. This way you can integrate
you own logo and use your company's colors.</para>
<section>
<title>Custom header</title>
<para>The default LAM Pro header includes a logo and a horizontal line.
You can enter any HTML code here. It will be included in the self
services pages after the body tag.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/configPageHeader.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
<section>
<title>CSS files</title>
<para>Usually, companies have regulations about their corporate design
and use common CSS files. This assures a common appearance of all
intranet pages (e.g. colors and fonts). To include additional CSS files
just use the following setting for this task. The additional CSS links
will be added after LAM Pro's default CSS link. This way you can
overwrite LAM Pro's style.</para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="images/configCSS.png"/>
</imageobject>
</mediaobject>
</screenshot>
</section>
</section>
</chapter>