#!/usr/bin/env bash
#TODO treeList, deleteList, _getFileCtimeMtime, conflictList should be called without having statedir informed. Just give the full path ?
#Check dryruns with nosuffix mode for timestampList
PROGRAM="osync" # Rsync based two way sync engine with fault tolerance
AUTHOR="(C) 2013-2019 by Orsiris de Jong"
CONTACT="http://www.netpower.fr/osync - ozy@netpower.fr"
PROGRAM_VERSION=1.3.0-pre-rc1
PROGRAM_BUILD=2019052009
IS_STABLE=false
CONFIG_FILE_REVISION_REQUIRED=1.3.0
##### Execution order #__WITH_PARANOIA_DEBUG
##### Function Name Is parallel #__WITH_PARANOIA_DEBUG
# GetLocalOS no #__WITH_PARANOIA_DEBUG
# InitLocalOSDependingSettings no #__WITH_PARANOIA_DEBUG
# CheckEnvironment no #__WITH_PARANOIA_DEBUG
# PreInit no #__WITH_PARANOIA_DEBUG
# Init no #__WITH_PARANOIA_DEBUG
# PostInit no #__WITH_PARANOIA_DEBUG
# GetRemoteOS no #__WITH_PARANOIA_DEBUG
# InitRemoteOSDependingSettings no #__WITH_PARANOIA_DEBUG
# CheckReplicas yes #__WITH_PARANOIA_DEBUG
# RunBeforeHook yes #__WITH_PARANOIA_DEBUG
# Main no #__WITH_PARANOIA_DEBUG
# HandleLocks yes #__WITH_PARANOIA_DEBUG
# Sync no #__WITH_PARANOIA_DEBUG
# treeList yes #__WITH_PARANOIA_DEBUG
# deleteList yes #__WITH_PARANOIA_DEBUG
# timestampList yes #__WITH_PARANOIA_DEBUG
# conflictList no #__WITH_PARANOIA_DEBUG
# syncAttrs no #__WITH_PARANOIA_DEBUG
# syncUpdate no #__WITH_PARANOIA_DEBUG
# syncUpdate no #__WITH_PARANOIA_DEBUG
# deletionPropagation yes #__WITH_PARANOIA_DEBUG
# treeList yes #__WITH_PARANOIA_DEBUG
# timestampList yes #__WITH_PARANOIA_DEBUG
# SoftDelete yes #__WITH_PARANOIA_DEBUG
# RunAfterHook yes #__WITH_PARANOIA_DEBUG
# UnlockReplicas yes #__WITH_PARANOIA_DEBUG
# CleanUp no #__WITH_PARANOIA_DEBUG
include #### OFUNCTIONS FULL SUBSET ####
# If using "include" statements, make sure the script does not get executed unless it's loaded by bootstrap.sh which will replace includes with actual code
include #### _OFUNCTIONS_BOOTSTRAP SUBSET ####
[ "$_OFUNCTIONS_BOOTSTRAP" != true ] && echo "Please use bootstrap.sh to load this dev version of $(basename $0)" && exit 1
_LOGGER_PREFIX="time"
## Working directory. This directory exists in any replica and contains state files, backups, soft deleted files etc
OSYNC_DIR=".osync_workdir"
# The catch CRTL+C behavior can be changed at script entry point with SOFT_STOP=0
function TrapStop {
if [ $SOFT_STOP -eq 2 ]; then
Logger " /!\ WARNING: Manual exit of osync is really not recommended. Sync will be in inconsistent state." "WARN"
Logger " /!\ WARNING: If you are sure, please hit CTRL+C another time to quit." "WARN"
SOFT_STOP=1
return 1
fi
if [ $SOFT_STOP -lt 2 ]; then
Logger " /!\ WARNING: CTRL+C hit. Exiting osync. Please wait while replicas get unlocked..." "WARN"
SOFT_STOP=0
exit 2
fi
}
function TrapQuit {
local exitcode
# Get ERROR / WARN alert flags from subprocesses that call Logger
if [ -f "$RUN_DIR/$PROGRAM.Logger.warn.$SCRIPT_PID.$TSTAMP" ]; then
WARN_ALERT=true
fi
if [ -f "$RUN_DIR/$PROGRAM.Logger.error.$SCRIPT_PID.$TSTAMP" ]; then
ERROR_ALERT=true
fi
if [ $ERROR_ALERT == true ]; then
UnlockReplicas
if [ "$RUN_AFTER_CMD_ON_ERROR" == true ]; then
RunAfterHook
fi
Logger "$PROGRAM finished with errors." "ERROR"
if [ "$_DEBUG" != true ]
then
SendAlert
else
Logger "Debug mode, no alert mail will be sent." "NOTICE"
fi
exitcode=1
elif [ $WARN_ALERT == true ]; then
UnlockReplicas
if [ "$RUN_AFTER_CMD_ON_ERROR" == true ]; then
RunAfterHook
fi
Logger "$PROGRAM finished with warnings." "WARN"
if [ "$_DEBUG" != true ]
then
SendAlert
else
Logger "Debug mode, no alert mail will be sent." "NOTICE"
fi
exitcode=2 # Warning exit code must not force daemon mode to quit
else
UnlockReplicas
RunAfterHook
Logger "$PROGRAM finished." "ALWAYS"
exitcode=0
fi
CleanUp
KillChilds $SCRIPT_PID > /dev/null 2>&1
exit $exitcode
}
function CheckEnvironment {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
if [ "$REMOTE_OPERATION" == true ]; then
if ! type ssh > /dev/null 2>&1 ; then
Logger "ssh not present. Cannot start sync." "CRITICAL"
exit 1
fi
if [ "$SSH_PASSWORD_FILE" != "" ] && ! type sshpass > /dev/null 2>&1 ; then
Logger "sshpass not present. Cannot use password authentication." "CRITICAL"
exit 1
fi
fi
if ! type rsync > /dev/null 2>&1 ; then
Logger "rsync not present. Sync cannot start." "CRITICAL"
exit 1
fi
if ! type pgrep > /dev/null 2>&1 ; then
Logger "pgrep not present. Sync cannot start." "CRITICAL"
exit 1
fi
if ! type sort > /dev/null 2>&1 ; then
Logger "sort not present. Sync cannot start." "CRITICAL"
exit 1
fi
if ! type uniq > /dev/null 2>&1 ; then
Logger "uniq not present. Sync cannot start." "CRITICAL"
exit 1
fi
if [ "$SUDO_EXEC" == true ]; then
if ! type sudo > /dev/null 2>&1 ; then
Logger "sudo not present. Sync cannot start." "CRITICAL"
exit 1
fi
fi
}
# Only gets checked in config file mode where all values should be present
function CheckCurrentConfig {
local fullCheck="${1:-true}"
local test
local booleans
local num_vars
__CheckArguments 1 $# "$@" #__WITH_PARANOIA_DEBUG
# Full check is for initiator driven runs
if [ $fullCheck == true ]; then
declare -a booleans=(CREATE_DIRS SUDO_EXEC SSH_COMPRESSION SSH_IGNORE_KNOWN_HOSTS REMOTE_HOST_PING PRESERVE_PERMISSIONS PRESERVE_OWNER PRESERVE_GROUP PRESERVE_EXECUTABILITY PRESERVE_ACL PRESERVE_XATTR COPY_SYMLINKS KEEP_DIRLINKS PRESERVE_HARDLINKS CHECKSUM RSYNC_COMPRESS CONFLICT_BACKUP CONFLICT_BACKUP_MULTIPLE SOFT_DELETE RESUME_SYNC FORCE_STRANGER_LOCK_RESUME PARTIAL DELTA_COPIES STOP_ON_CMD_ERROR RUN_AFTER_CMD_ON_ERROR)
declare -a num_vars=(MINIMUM_SPACE BANDWIDTH SOFT_MAX_EXEC_TIME HARD_MAX_EXEC_TIME KEEP_LOGGING MIN_WAIT MAX_WAIT CONFLICT_BACKUP_DAYS SOFT_DELETE_DAYS RESUME_TRY MAX_EXEC_TIME_PER_CMD_BEFORE MAX_EXEC_TIME_PER_CMD_AFTER)
# target-helper runs need less configuration
else
declare -a booleans=(SUDO_EXEC SSH_COMPRESSION SSH_IGNORE_KNOWN_HOSTS REMOTE_HOST_PING STOP_ON_CMD_ERROR RUN_AFTER_CMD_ON_ERROR)
declare -a num_vars=(KEEP_LOGGING MIN_WAIT MAX_WAIT)
fi
# v2 config will use true / false instead of yes / no
# Check all variables that should contain "yes" or "no", true or false
for i in "${booleans[@]}"; do
#test="if [ \"\$$i\" != \"yes\" ] && [ \"\$$i\" != \"no\" ] && [ \"\$$i\" != true ] && [ \"\$$i\" != false ]; then Logger \"Bogus $i value [\$$i] defined in config file. Correct your config file or update it using the update script if using and old version.\" \"CRITICAL\"; exit 1; fi"
test="if [ \"\$$i\" != true ] && [ \"\$$i\" != false ]; then Logger \"Bogus $i value [\$$i] defined in config file. Correct your config file or update it using the update script if using and old version.\" \"CRITICAL\"; exit 1; fi"
eval "$test"
# Fix for upcomming v2 where yes and no do not exist anymore
done
# Check all variables that should contain a numerical value >= 0
for i in "${num_vars[@]}"; do
test="if [ $(IsNumericExpand \"\$$i\") -eq 0 ]; then Logger \"Bogus $i value [\$$i] defined in config file. Correct your config file or update it using the update script if using and old version.\" \"CRITICAL\"; exit 1; fi"
eval "$test"
done
}
# Change all booleans with "yes" or "no" to true / false for v2 config syntax compatibility
function UpdateBooleans {
local update
local booleans
declare -a booleans=(CREATE_DIRS SUDO_EXEC SSH_COMPRESSION SSH_IGNORE_KNOWN_HOSTS REMOTE_HOST_PING PRESERVE_PERMISSIONS PRESERVE_OWNER PRESERVE_GROUP PRESERVE_EXECUTABILITY PRESERVE_ACL PRESERVE_XATTR COPY_SYMLINKS KEEP_DIRLINKS PRESERVE_HARDLINKS CHECKSUM RSYNC_COMPRESS CONFLICT_BACKUP CONFLICT_BACKUP_MULTIPLE SOFT_DELETE RESUME_SYNC FORCE_STRANGER_LOCK_RESUME PARTIAL DELTA_COPIES STOP_ON_CMD_ERROR RUN_AFTER_CMD_ON_ERROR)
for i in "${booleans[@]}"; do
update="if [ \"\$$i\" == \"yes\" ]; then $i=true; fi; if [ \"\$$i\" == \"no\" ]; then $i=false; fi"
eval "$update"
done
}
# Gets checked in quicksync and config file mode
function CheckCurrentConfigAll {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local tmp
if [ "$INSTANCE_ID" == "" ]; then
Logger "No INSTANCE_ID defined in config file." "CRITICAL"
exit 1
fi
if [ "$INITIATOR_SYNC_DIR" == "" ]; then
Logger "No INITIATOR_SYNC_DIR set in config file." "CRITICAL"
exit 1
fi
if [ "$TARGET_SYNC_DIR" == "" ]; then
Logger "Not TARGET_SYNC_DIR set in config file." "CRITICAL"
exit 1
fi
if [ "$REMOTE_OPERATION" == true ] && ([ ! -f "$SSH_RSA_PRIVATE_KEY" ] && [ ! -f "$SSH_PASSWORD_FILE" ]); then
Logger "Cannot find rsa private key [$SSH_RSA_PRIVATE_KEY] nor password file [$SSH_PASSWORD_FILE]. No authentication method provided." "CRITICAL"
exit 1
fi
if [ "$SKIP_DELETION" != "" ]; then
tmp="$SKIP_DELETION"
IFS=',' read -r -a SKIP_DELETION <<< "$tmp"
if [ $(ArrayContains "${INITIATOR[$__type]}" "${SKIP_DELETION[@]}") -eq 0 ] && [ $(ArrayContains "${TARGET[$__type]}" "${SKIP_DELETION[@]}") -eq 0 ]; then
Logger "Bogus skip deletion parameter [$SKIP_DELETION]." "CRITICAL"
exit 1
fi
fi
if [ "$SYNC_TYPE" != "" ]; then
if [ "$SYNC_TYPE" != "initiator2target" ] && [ "$SYNC_TYPE" != "target2initiator" ]; then
Logger "Bogus sync type parameter [$SYNC_TYPE]." "CRITICAL"
exit 1
fi
fi
}
###### Osync specific functions (non shared)
function _CheckReplicasLocal {
local replicaPath="${1}"
local replicaType="${2}"
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local diskSpace
if [ ! -d "$replicaPath" ]; then
if [ "$CREATE_DIRS" == true ]; then
mkdir -p "$replicaPath" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot create local replica path [$replicaPath]." "CRITICAL" $retval
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
return 1
else
Logger "Created local replica path [$replicaPath]." "NOTICE"
fi
else
Logger "Local replica path [$replicaPath] does not exist / is not writable." "CRITICAL"
return 1
fi
fi
if [ ! -w "$replicaPath" ]; then
Logger "Local replica path [$replicaPath] is not writable." "CRITICAL"
return 1
fi
Logger "Checking minimum disk space in local replica [$replicaPath]." "NOTICE"
diskSpace=$($DF_CMD "$replicaPath" | tail -1 | awk '{print $4}')
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot get free space." "ERROR" $retval
else
# Ugly fix for df in some busybox environments that can only show human formats
if [ $(IsInteger $diskSpace) -eq 0 ]; then
diskSpace=$(HumanToNumeric $diskSpace)
fi
if [ $diskSpace -lt $MINIMUM_SPACE ]; then
Logger "There is not enough free space on local replica [$replicaPath] ($diskSpace KB)." "WARN"
fi
fi
}
function _CheckReplicasRemote {
local replicaPath="${1}"
local replicaType="${2}"
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local cmd
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env replicaPath="'$replicaPath'" env CREATE_DIRS="'$CREATE_DIRS'" env DF_CMD="'$DF_CMD'" env MINIMUM_SPACE="'$MINIMUM_SPACE'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### IsInteger SUBSET ####
include #### HumanToNumeric SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
function _CheckReplicasRemoteSub {
if [ ! -d "$replicaPath" ]; then
if [ "$CREATE_DIRS" == true ]; then
mkdir -p "$replicaPath"
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot create remote replica path [$replicaPath]." "CRITICAL" $retval
exit 1
else
RemoteLogger "Created remote replica path [$replicaPath]." "NOTICE"
fi
else
RemoteLogger "Remote replica path [$replicaPath] does not exist / is not writable." "CRITICAL"
exit 1
fi
fi
if [ ! -w "$replicaPath" ]; then
RemoteLogger "Remote replica path [$replicaPath] is not writable." "CRITICAL"
exit 1
fi
RemoteLogger "Checking minimum disk space in remote replica [$replicaPath]." "NOTICE"
diskSpace=$($DF_CMD "$replicaPath" | tail -1 | awk '{print $4}')
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot get free space." "ERROR" $retval
else
# Ugly fix for df in some busybox environments that can only show human formats
if [ $(IsInteger $diskSpace) -eq 0 ]; then
diskSpace=$(HumanToNumeric $diskSpace)
fi
if [ $diskSpace -lt $MINIMUM_SPACE ]; then
RemoteLogger "There is not enough free space on remote replica [$replicaPath] ($diskSpace KB)." "WARN"
fi
fi
return $retval
}
_CheckReplicasRemoteSub
retval=$?
CleanUp
exit $retval
ENDSSH
retval=$?
if [ $retval -ne 0 ]; then
Logger "Failed to check remote replica." "CRITICAL" $retval
fi
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
(
_LOGGER_PREFIX=""
Logger "$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "NOTICE"
)
fi
if [ $retval -ne 0 ]; then
return $retval
else
return 0
fi
}
function CheckReplicas {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local initiatorPid
local targetPid
local retval
if [ "$REMOTE_OPERATION" != true ]; then
if [ "${INITIATOR[$__replicaDir]}" == "${TARGET[$__replicaDir]}" ]; then
Logger "Initiator and target path [${INITIATOR[$__replicaDir]}] cannot be the same." "CRITICAL"
exit 1
fi
fi
_CheckReplicasLocal "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" &
initiatorPid=$!
if [ "$REMOTE_OPERATION" != true ]; then
_CheckReplicasLocal "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" &
targetPid=$!
else
_CheckReplicasRemote "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "${FUNCNAME[0]}" false 0 0 720 1800 true $SLEEP_TIME $KEEP_LOGGING
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cancelling task." "CRITICAL" $retval
exit 1
fi
}
function _HandleLocksLocal {
local replicaStateDir="${1}"
local lockfile="${2}"
local replicaType="${3}"
local overwrite="${4:-false}"
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local lockfileContent
local lockPid
local lockInstanceID
local writeLocks=false
if [ ! -d "$replicaStateDir" ]; then
mkdir -p "$replicaStateDir" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot create state dir [$replicaStateDir]." "CRITICAL" $retval
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
return 1
fi
fi
# Skip the whole part if overwrite true
if [ -s "$lockfile" ] && [ $overwrite != true ]; then
lockfileContent=$(cat $lockfile)
Logger "Master lock pid present: $lockfileContent" "DEBUG"
lockPid="${lockfileContent%@*}"
if [ $(IsInteger $lockPid) -ne 1 ]; then
Logger "Invalid pid [$lockPid] in local replica." "CRITICAL"
return 1
fi
lockInstanceID="${lockfileContent#*@}"
if [ "$lockInstanceID" == "" ]; then
Logger "Invalid instance id [$lockInstanceID] in local replica." "CRITICAL"
return 1
Logger "Local $replicaType lock is: [$lockPid@$lockInstanceID]." "DEBUG"
fi
kill -0 $lockPid > /dev/null 2>&1
retval=$?
if [ $retval -ne 0 ]; then
Logger "There is a local dead osync lock [$lockPid@$lockInstanceID] that is no longer running. Resuming." "NOTICE"
writeLocks=true
else
Logger "There is already a local instance [$lockPid@$lockInstanceID] of osync running for this replica. Cannot start." "CRITICAL" $retval
return 1
fi
else
writeLocks=true
fi
if [ $writeLocks != true ]; then
return 1
else
echo "$SCRIPT_PID@$INSTANCE_ID" > "$lockfile" 2> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Could not create lock file on local $replicaType in [$lockfile]." "CRITICAL" $retval
Logger "Command output\n$($RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
return 1
else
Logger "Locked local $replicaType replica in [$lockfile]." "DEBUG"
fi
fi
}
function _HandleLocksRemote {
local replicaStateDir="${1}"
local lockfile="${2}"
local replicaType="${3}"
local overwrite="${4:-false}"
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local initiatorRunningPids
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
# Create an array of all currently running pids
read -a initiatorRunningPids <<< $(ps -A | tail -n +2 | awk '{print $1}')
# passing initiatorRunningPids as litteral string (has to be run through eval to be an array again)
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env replicaStateDir="'$replicaStateDir'" env initiatorRunningPidsFlat="\"(${initiatorRunningPids[@]})\"" env lockfile="'$lockfile'" env replicaType="'$replicaType'" env overwrite="'$overwrite'" \
env INSTANCE_ID="'$INSTANCE_ID'" env FORCE_STRANGER_LOCK_RESUME="'$FORCE_STRANGER_LOCK_RESUME'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### ArrayContains SUBSET ####
include #### IsInteger SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
function _HandleLocksRemoteSub {
local writeLocks=false
if [ ! -d "$replicaStateDir" ]; then
mkdir -p "$replicaStateDir"
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot create state dir [$replicaStateDir]." "CRITICAL" $retval
return 1
fi
fi
# Skip the whole part if overwrite true
if [ -s "$lockfile" ] && [ $overwrite != true ]; then
lockfileContent=$(cat "$lockfile")
RemoteLogger "Master lock pid present: $lockfileContent" "DEBUG"
lockPid="${lockfileContent%@*}"
if [ $(IsInteger $lockPid) -ne 1 ]; then
RemoteLogger "Invalid pid [$lockPid] in local replica." "CRITICAL"
return 1
fi
lockInstanceID="${lockfileContent#*@}"
if [ "$lockInstanceID" == "" ]; then
RemoteLogger "Invalid instance id [$lockInstanceID] in local replica." "CRITICAL"
return 1
RemoteLogger "Local $replicaType lock is: [$lockPid@$lockInstanceID]." "DEBUG"
fi
# Retransform litteral array string to array
eval "initiatorRunningPids=$initiatorRunningPidsFlat"
if [ $(ArrayContains "$lockPid" "${initiatorRunningPids[@]}") -eq 0 ]; then
if [ "$lockInstanceID" == "$INSTANCE_ID" ]; then
RemoteLogger "There is a remote dead osync lock [$lockPid@$lockInstanceID] on target replica that corresponds to this initiator INSTANCE_ID. Pid [$lockPid] no longer running. Resuming." "NOTICE"
writeLocks=true
else
if [ "$FORCE_STRANGER_LOCK_RESUME" == true ]; then
RemoteLogger "There is a remote (maybe dead) osync lock [$lockPid@$lockInstanceID] on target replica that does not correspond to this initiator INSTANCE_ID. Forcing resume." "WARN"
writeLocks=true
else
RemoteLogger "There is a remote (maybe dead) osync lock [$lockPid@$lockInstanceID] on target replica that does not correspond to this initiator INSTANCE_ID. Will not resume." "CRITICAL"
return 1
fi
fi
else
RemoteLogger "There is already a local instance of osync that locks target replica [$lockPid@$lockInstanceID]. Cannot start." "CRITICAL"
return 1
fi
else
writeLocks=true
fi
if [ $writeLocks != true ]; then
return 1
else
echo "$SCRIPT_PID@$INSTANCE_ID" > "$lockfile"
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Could not create lock file on local $replicaType in [$lockfile]." "CRITICAL" $retval
return 1
else
RemoteLogger "Locked local $replicaType replica in [$lockfile]." "DEBUG"
return 0
fi
fi
}
_HandleLocksRemoteSub
retval=$?
CleanUp
exit $retval
ENDSSH
retval=$?
if [ $retval -ne 0 ]; then
Logger "Remote lock handling failed." "CRITICAL" $retval
fi
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
(
_LOGGER_PREFIX=""
Logger "$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "NOTICE"
)
fi
if [ $retval -ne 0 ]; then
return 1
fi
}
function HandleLocks {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local initiatorPid
local targetPid
local overwrite=false
# Assume lock files are created successfully unless stated otherwise
local initiatorLockSuccess=true
local targetLockSuccess=true
if [ $_NOLOCKS == true ]; then
return 0
fi
# Do not bother checking for locks when FORCE_UNLOCK is set
if [ $FORCE_UNLOCK == true ]; then
overwrite=true
fi
_HandleLocksLocal "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}" "${INITIATOR[$__lockFile]}" "${INITIATOR[$__type]}" $overwrite &
initiatorPid=$!
if [ "$REMOTE_OPERATION" != true ]; then
_HandleLocksLocal "${TARGET[$__replicaDir]}${TARGET[$__stateDir]}" "${TARGET[$__lockFile]}" "${TARGET[$__type]}" $overwrite &
targetPid=$!
else
_HandleLocksRemote "${TARGET[$__replicaDir]}${TARGET[$__stateDir]}" "${TARGET[$__lockFile]}" "${TARGET[$__type]}" $overwrite &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "HandleLocks" false 0 0 720 1800 true $SLEEP_TIME $KEEP_LOGGING
retval=$?
if [ $retval -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_HandleLocks"
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
initiatorLockSuccess=false
elif [ "$pid" == "$targetPid" ]; then
targetLockSuccess=false
fi
done
#WIP refactor the following
if [ $initiatorLockSuccess == true ]; then
INITIATOR_LOCK_FILE_EXISTS=true
fi
if [ $targetLockSuccess == true ]; then
TARGET_LOCK_FILE_EXISTS=true
fi
Logger "Cancelling task." "CRITICAL" $retval
exit 1
fi
if [ $initiatorLockSuccess == true ]; then
INITIATOR_LOCK_FILE_EXISTS=true
fi
if [ $targetLockSuccess == true ]; then
TARGET_LOCK_FILE_EXISTS=true
fi
}
function _UnlockReplicasLocal {
local lockfile="${1}"
local replicaType="${2}"
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
if [ -f "$lockfile" ]; then
rm -f "$lockfile"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Could not unlock local $replicaType replica." "ERROR" $retval
else
Logger "Removed local $replicaType replica lock." "DEBUG"
fi
fi
}
function _UnlockReplicasRemote {
local lockfile="${1}"
local replicaType="${2}"
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local cmd
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" env lockfile="'$lockfile'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
if [ -f "$lockfile" ]; then
rm -f "$lockfile"
fi
ENDSSH
retval=$?
if [ $retval -ne 0 ]; then
Logger "Could not unlock $replicaType remote replica." "ERROR" $retval
Logger "Command Output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
else
Logger "Removed remote $replicaType replica lock." "DEBUG"
fi
}
function UnlockReplicas {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local initiatorPid=0
local targetPid=0
local unlockPids=0
if [ $_NOLOCKS == true ]; then
return 0
fi
if [ $INITIATOR_LOCK_FILE_EXISTS == true ]; then
_UnlockReplicasLocal "${INITIATOR[$__lockFile]}" "${INITIATOR[$__type]}" &
initiatorPid=$!
fi
if [ $TARGET_LOCK_FILE_EXISTS == true ]; then
if [ "$REMOTE_OPERATION" != true ]; then
_UnlockReplicasLocal "${TARGET[$__lockFile]}" "${TARGET[$__type]}" &
targetPid=$!
else
_UnlockReplicasRemote "${TARGET[$__lockFile]}" "${TARGET[$__type]}" &
targetPid=$!
fi
fi
if [ "$initiatorPid" -ne 0 ]; then
unlockPids=$initiatorPid
fi
if [ "$targetPid" -ne 0 ]; then
if [ "$unlockPids" -ne 0 ]; then
unlockPids="$unlockPids;$targetPid"
else
unlockPids="$targetPid"
fi
fi
if [ "$unlockPids" != "0" ]; then
ExecTasks "$unlockPids" "${FUNCNAME[0]}" false 0 0 720 1800 true $SLEEP_TIME $KEEP_LOGGING
fi
}
###### Sync core functions
## Rsync does not like spaces in directory names, considering it as two different directories. Handling this schema by escaping space.
## It seems this only happens when trying to execute an rsync command through weval $rsyncCmd on a remote host.
## So I am using unescaped $INITIATOR_SYNC_DIR for local rsync calls and escaped $ESC_INITIATOR_SYNC_DIR for remote rsync calls like user@host:$ESC_INITIATOR_SYNC_DIR
## The same applies for target sync dir..............................................T.H.I.S..I.S..A..P.R.O.G.R.A.M.M.I.N.G..N.I.G.H.T.M.A.R.E
function treeList {
local replicaPath="${1}" # path to the replica for which a tree needs to be constructed
local replicaType="${2}" # replica type: initiator, target
local treeFilename="${3}" # filename to output tree (will be prefixed with $replicaType)
__CheckArguments 3 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local escapedReplicaPath
local rsyncCmd
escapedReplicaPath=$(EscapeSpaces "$replicaPath")
# operation explanation
# (command || :) = Return code 0 regardless of command return code
# (grep -E \"^-|^d|^l\" || :) = Be sure line begins with '-' or 'd' or 'l' (rsync semantics for file, directory or symlink)
# (sed -r 's/^.{10} +[0-9,]+ [0-9/]{10} [0-9:]{8} //' || :) = Remove everything before timestamps
# (awk 'BEGIN { FS=\" -> \" } ; { print \$1 }' || :) = Only show output before ' -> ' in order to remove symlink destinations
# (grep -v \"^\.$\" || :) = Removes line containing current directory sign '.'
Logger "Creating $replicaType replica file list [$replicaPath]." "NOTICE"
if [ "$REMOTE_OPERATION" == true ] && [ "$replicaType" == "${TARGET[$__type]}" ]; then
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DEFAULT_ARGS $RSYNC_ATTR_ARGS $RSYNC_TYPE_ARGS --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE -e \"$RSYNC_SSH_CMD\" --list-only $REMOTE_USER@$REMOTE_HOST:\"$escapedReplicaPath\" 2> \"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP\" | (grep -E \"^-|^d|^l\" || :) | (sed $SED_REGEX_ARG 's/^.{10} +[0-9,]+ [0-9/]{10} [0-9:]{8} //' || :) | (awk 'BEGIN { FS=\" -> \" } ; { print \$1 }' || :) | (grep -v \"^\.$\" || :) | sort > \"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP\""
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DEFAULT_ARGS $RSYNC_ATTR_ARGS $RSYNC_TYPE_ARGS --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE --list-only \"$replicaPath\" 2> \"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP\" | (grep -E \"^-|^d|^l\" || :) | (sed $SED_REGEX_ARG 's/^.{10} +[0-9,]+ [0-9/]{10} [0-9:]{8} //' || :) | (awk 'BEGIN { FS=\" -> \" } ; { print \$1 }' || :) | (grep -v \"^\.$\" || :) | sort > \"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP\""
fi
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd"
retval=$?
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
mv -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" "$treeFilename"
fi
## Retval 24 = some files vanished while creating list
if ([ $retval -eq 0 ] || [ $retval -eq 24 ]) then
return $?
elif [ $retval -eq 23 ]; then
Logger "Some files could not be listed in $replicaType replica [$replicaPath]. Check for failing symlinks." "ERROR" $retval
Logger "Command output\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP)" "WARN"
return 0
else
Logger "Cannot create replica file list in [$replicaPath]." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
Logger "Command output\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP)" "WARN"
return $retval
fi
}
# deleteList(replicaType): Creates a list of files vanished from last run on replica $1 (initiator/target)
function deleteList {
local replicaType="${1}" # replica type: initiator, target
__CheckArguments 1 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local subretval
local cmd
local failedDeletionListFromReplica
if [ "$replicaType" == "${INITIATOR[$__type]}" ]; then
failedDeletionListFromReplica="${TARGET[$__type]}"
elif [ "$replicaType" == "${TARGET[$__type]}" ]; then
failedDeletionListFromReplica="${INITIATOR[$__type]}"
else
Logger "Bogus replicaType in [${FUNCNAME[0]}]." "CRITICAL"
exit 1
fi
Logger "Creating $replicaType replica deleted file list." "NOTICE"
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__treeAfterFileNoSuffix]}" ]; then
## Same functionnality, comm is much faster than grep but is not available on every platform
if type comm > /dev/null 2>&1 ; then
cmd="comm -23 \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__treeAfterFileNoSuffix]}\" \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__treeCurrentFile]}\" > \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}\""
else
## The || : forces the command to have a good result
cmd="(grep -F -x -v -f \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__treeCurrentFile]}\" \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__treeAfterFileNoSuffix]}\" || :) > \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}\""
fi
Logger "Launching command [$cmd]." "DEBUG"
eval "$cmd" 2>> "$LOG_FILE"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Could not prepare $replicaType deletion list." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$cmd]." "WARN"
return $retval
fi
# Add delete failed file list to current delete list and then empty it
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$failedDeletionListFromReplica${INITIATOR[$__failedDeletedListFile]}" ]; then
cat "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$failedDeletionListFromReplica${INITIATOR[$__failedDeletedListFile]}" >> "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}"
subretval=$?
if [ $subretval -eq 0 ]; then
rm -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$failedDeletionListFromReplica${INITIATOR[$__failedDeletedListFile]}"
else
Logger "Cannot add failed deleted list to current deleted list for replica [$replicaType]." "ERROR" $subretval
fi
fi
else
touch "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}"
fi
# Make sure deletion list does not contain duplicates from faledDeleteListFile
uniq "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
mv "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__deletedListFile]}"
fi
return $retval
}
function _getFileCtimeMtimeLocal {
local replicaPath="${1}" # Contains replica path
local replicaType="${2}" # Initiator / Target
local fileList="${3}" # Contains list of files to get time attrs
local timestampFile="${4}" # Where to store the timestamp file
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
echo -n "" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP"
while IFS='' read -r file; do
$STAT_CTIME_MTIME_CMD "$replicaPath$file" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP"
if [ $? -ne 0 ]; then
Logger "Could not get file attributes for [$replicaPath$file]." "ERROR"
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
done < "$fileList"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Getting file time attributes failed [$retval] on $replicaType. Stopping execution." "CRITICAL" $retval
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Command output:\n$(cat "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.error.$SCRIPT_PID.$TSTAMP")" "WARN"
fi
return 1
else
cat "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" | sort > "$timestampFile"
return $?
fi
}
function _getFileCtimeMtimeRemote {
local replicaPath="${1}" # Contains replica path
local replicaType="${2}"
local fileList="${3}"
local timestampFile="${4}"
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local cmd
cmd='cat "'$fileList'" | '$SSH_CMD' "env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN cat > \"./$PROGRAM._getFileCtimeMtimeRemote.Sent.$replicaType.$SCRIPT_PID.$TSTAMP\""'
Logger "Launching command [$cmd]." "DEBUG"
eval "$cmd"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Sending ctime required file list failed with [$retval] on $replicaType. Stopping execution." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$cmd]." "WARN"
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
fi
return $retval
fi
#WIP: do we need separate error and non error files ?
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env replicaPath="'$replicaPath'" env replicaType="'$replicaType'" env REMOTE_STAT_CTIME_MTIME_CMD="'$REMOTE_STAT_CTIME_MTIME_CMD'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP"
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### IsInteger SUBSET ####
include #### HumanToNumeric SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
function _getFileCtimeMtimeRemoteSub {
while IFS='' read -r file; do
$REMOTE_STAT_CTIME_MTIME_CMD "$replicaPath$file"
if [ $? -ne 0 ]; then
RemoteLogger "Could not get file attributes for [$replicaPath$file]." "ERROR"
echo 1 > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
done < "./$PROGRAM._getFileCtimeMtimeRemote.Sent.$replicaType.$SCRIPT_PID.$TSTAMP"
if [ -f "./$PROGRAM._getFileCtimeMtimeRemote.Sent.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
rm -f "./$PROGRAM._getFileCtimeMtimeRemote.Sent.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
return 1
else
return 0
fi
}
_getFileCtimeMtimeRemoteSub
retval=$?
CleanUp
exit $retval
ENDSSH
retval=$?
if [ $retval -ne 0 ]; then
Logger "Getting file attributes failed [$retval] on $replicaType. Stopping execution." "CRITICAL" $retval
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
fi
return $retval
else
# Ugly fix for csh in FreeBSD 11 that adds leading and trailing '\"'
sed -i'.tmp' -e 's/^\\"//' -e 's/\\"$//' "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot fix FreeBSD 11 remote csh syntax." "ERROR"
return $retval
fi
cat "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" | sort > "$timestampFile"
if [ $retval -ne 0 ]; then
Logger "Cannot create timestamp file for $replicaType." "ERROR"
return $retval
fi
fi
}
#WIP function that takes treeList files and gets ctime and mtime for each file, then compares those files to create the conflict file list
function timestampList {
local replicaPath="${1}" # path to the replica for which a tree needs to be constructed
local replicaType="${2}" # replica type: initiator, target
local fileList="${3}" # List of files to get timestamps for
local timestampFilename="${4}" # filename to output timestamp list (will be prefixed with $replicaType)
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local escapedReplicaPath
local rsyncCmd
Logger "Getting file stats for $replicaType replica [$replicaPath]." "NOTICE"
if [ "$REMOTE_OPERATION" == true ] && [ "$replicaType" == "${TARGET[$__type]}" ]; then
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
_getFileCtimeMtimeRemote "$replicaPath" "$replicaType" "$fileList" "$timestampFilename"
else
_getFileCtimeMtimeLocal "$replicaPath" "$replicaType" "$fileList" "$timestampFilename"
fi
retval=$?
return $retval
}
function conflictList {
local timestampCurrentFilename="${1}" # filename of current timestamp list (will be prefixed with $replicaType)
local timestampAfterFilename="${2}" # filename of previous timestamp list (will be prefixed with $replicaType)
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local escapedReplicaPath
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampCurrentFilename" ] && [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampCurrentFilename" ]; then
# Remove prepending replicaPaths
sed -i'.withReplicaPath' "s;^${INITIATOR[$__replicaDir]};;g" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampCurrentFilename"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot remove prepending replicaPaths for current initiator timestamp file." "ERROR"
return $retval
fi
sed -i'.withReplicaPath' "s;^${TARGET[$__replicaDir]};;g" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampCurrentFilename"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot remove prepending replicaPaths for current target timestamp file." "ERROR"
return $retval
fi
fi
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampAfterFilename" ] && [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampAfterFilename" ]; then
# Remove prepending replicaPaths
sed -i'.withReplicaPath' "s;^${INITIATOR[$__replicaDir]};;g" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampAfterFilename"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot remove prepending replicaPaths for after initiator timestamp file." "ERROR"
return $retval
fi
sed -i'.withReplicaPath' "s;^${TARGET[$__replicaDir]};;g" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampAfterFilename"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot remove prepending replicaPaths for after target timestamp file." "ERROR"
return $retval
fi
fi
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampAfterFilename" ] && [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampAfterFilename" ]; then
Logger "Creating conflictual file list." "NOTICE"
comm -23 "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampCurrentFilename" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}$timestampAfterFilename" | sort -t ';' -k 1,1 > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot extract conflict data for initiator replica." "ERROR"
return $retval
fi
comm -23 "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampCurrentFilename" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}$timestampAfterFilename" | sort -t ';' -k 1,1 > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot extract conflict data for target replica.." "ERROR"
return $retval
fi
join -j 1 -t ';' -o 1.1,1.2,1.3,2.2,2.3 "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.compare.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot create conflict list file." "ERROR"
return $retval
fi
fi
}
# rsync does sync with mtime, but file attribute modifications only change ctime.
# Hence, detect newer ctime on the replica that gets updated first with CONFLICT_PREVALANCE and update all newer file attributes on this replica before real update
function syncAttrs {
local initiatorReplica="${1}"
local targetReplica="${2}"
__CheckArguments 2 $# "$@" #__WITH_PARANOIA_DEBUG
local initiatorPid
local targetPid
local rsyncCmd
local retval
local sourceDir
local destDir
local escSourceDir
local escDestDir
local destReplica
if [ "$LOCAL_OS" == "BusyBox" ] || [ "$LOCAL_OS" == "Android" ] || [ "$REMOTE_OS" == "BusyBox" ] || [ "$REMOTE_OS" == "Android" ]; then
Logger "Skipping acl synchronization. Busybox does not have join command." "NOTICE"
return 0
fi
Logger "Getting list of files that need updates." "NOTICE"
if [ "$REMOTE_OPERATION" == true ]; then
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" -i -n $RSYNC_DEFAULT_ARGS $RSYNC_ATTR_ARGS $RSYNC_PARTIAL_EXCLUDE -e \"$RSYNC_SSH_CMD\" --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE \"$initiatorReplica\" $REMOTE_USER@$REMOTE_HOST:\"$targetReplica\" >> $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP 2>&1"
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" -i -n $RSYNC_DEFAULT_ARGS $RSYNC_ATTR_ARGS $RSYNC_PARTIAL_EXCLUDE --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE \"$initiatorReplica\" \"$targetReplica\" >> $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP 2>&1"
fi
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd" &
ExecTasks $! "${FUNCNAME[0]}_1" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
retval=$?
if [ $retval -ne 0 ] && [ $retval -ne 24 ]; then
Logger "Getting list of files that need updates failed [$retval]. Stopping execution." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Rsync output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP)" "NOTICE"
fi
return $retval
else
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP" ]; then
Logger "List:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
fi
( grep -Ev "^[^ ]*(c|s|t)[^ ]* " "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP" || :) | ( grep -E "^[^ ]*(p|o|g|a)[^ ]* " || :) | sed -e 's/^[^ ]* //' >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-cleaned.$SCRIPT_PID.$TSTAMP"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot prepare file list for attribute sync." "CRITICAL" $retval
exit 1
fi
fi
Logger "Getting ctimes for pending files on initiator." "NOTICE"
_getFileCtimeMtimeLocal "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-cleaned.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.ctime_mtime___.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP" &
initiatorPid=$!
Logger "Getting ctimes for pending files on target." "NOTICE"
if [ "$REMOTE_OPERATION" != true ]; then
_getFileCtimeMtimeLocal "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-cleaned.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.ctime_mtime___.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP" &
targetPid=$!
else
_getFileCtimeMtimeRemote "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-cleaned.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.ctime_mtime___.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "${FUNCNAME[0]}_2" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
retval=$?
if [ $retval -ne 0 ]; then
Logger "Getting ctime attributes failed." "CRITICAL" $retval
return 1
fi
# If target gets updated first, then sync_attr must update initiators attrs first
# For join, remove leading replica paths
sed -i'.tmp' "s;^${INITIATOR[$__replicaDir]};;g" "$RUN_DIR/$PROGRAM.ctime_mtime___.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP"
sed -i'.tmp' "s;^${TARGET[$__replicaDir]};;g" "$RUN_DIR/$PROGRAM.ctime_mtime___.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP"
if [ "$CONFLICT_PREVALANCE" == "${TARGET[$__type]}" ]; then
sourceDir="${INITIATOR[$__replicaDir]}"
escSourceDir=$(EscapeSpaces "${INITIATOR[$__replicaDir]}")
destDir="${TARGET[$__replicaDir]}"
escDestDir=$(EscapeSpaces "${TARGET[$__replicaDir]}")
destReplica="${TARGET[$__type]}"
join -j 1 -t ';' -o 1.1,1.2,2.2 "$RUN_DIR/$PROGRAM.ctime_mtime___.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.ctime_mtime___.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP" | awk -F';' '{if ($2 > $3) print $1}' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP"
else
sourceDir="${TARGET[$__replicaDir]}"
escSourceDir=$(EscapeSpaces "${TARGET[$__replicaDir]}")
destDir="${INITIATOR[$__replicaDir]}"
escDestDir=$(EscapeSpaces "${INITIATOR[$__replicaDir]}")
destReplica="${INITIATOR[$__type]}"
join -j 1 -t ';' -o 1.1,1.2,2.2 "$RUN_DIR/$PROGRAM.ctime_mtime___.${TARGET[$__type]}.$SCRIPT_PID.$TSTAMP" "$RUN_DIR/$PROGRAM.ctime_mtime___.${INITIATOR[$__type]}.$SCRIPT_PID.$TSTAMP" | awk -F';' '{if ($2 > $3) print $1}' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP"
fi
if [ $(wc -l < "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP") -eq 0 ]; then
Logger "Updating file attributes on $destReplica not required" "NOTICE"
return 0
fi
Logger "Updating file attributes on $destReplica." "NOTICE"
if [ "$REMOTE_OPERATION" == true ]; then
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
# No rsync args (hence no -r) because files are selected with --from-file
if [ "$destReplica" == "${INITIATOR[$__type]}" ]; then
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__deletedListFile]}\" --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__deletedListFile]}\" --files-from=\"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP\" $REMOTE_USER@$REMOTE_HOST:\"$escSourceDir\" \"$destDir\" >> $RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP 2>&1"
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__deletedListFile]}\" --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__deletedListFile]}\" --files-from=\"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP\" \"$sourceDir\" $REMOTE_USER@$REMOTE_HOST:\"$escDestDir\" >> $RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP 2>&1"
fi
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $SYNC_OPTS --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__deletedListFile]}\" --exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__deletedListFile]}\" --files-from=\"$RUN_DIR/$PROGRAM.${FUNCNAME[0]}-ctime_files.$SCRIPT_PID.$TSTAMP\" \"$sourceDir\" \"$destDir\" >> $RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP 2>&1"
fi
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd" &
ExecTasks $! "${FUNCNAME[0]}_3" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
retval=$?
if [ $retval -ne 0 ] && [ $retval -ne 24 ]; then
Logger "Updating file attributes on $destReplica [$retval]. Stopping execution." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
if [ -f "$RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Rsync output:\n$(cat $RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP)" "NOTICE"
fi
return 1
else
if [ -f "$RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP" ]; then
Logger "List:\n$(cat $RUN_DIR/$PROGRAM.attr-update.$destReplica.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
fi
Logger "Successfully updated file attributes on $destReplica replica." "NOTICE"
fi
}
# syncUpdate(source replica, destination replica, delete_list_filename)
function syncUpdate {
local sourceReplica="${1}" # Contains replica type of source: initiator, target
local destinationReplica="${2}" # Contains replica type of destination: initiator, target
local remoteDelete="${3:-false}" # Use rsnyc to delete remote files if not existent in source
__CheckArguments 2-3 $# "$@" #__WITH_PARANOIA_DEBUG
local rsyncCmd
local retval
local sourceDir
local escSourceDir
local destDir
local escDestDir
local backupArgs
local deleteArgs
local exclude_list_initiator
local exclude_list_target
Logger "Updating $destinationReplica replica." "NOTICE"
if [ "$sourceReplica" == "${INITIATOR[$__type]}" ]; then
sourceDir="${INITIATOR[$__replicaDir]}"
destDir="${TARGET[$__replicaDir]}"
backupArgs="$TARGET_BACKUP"
escSourceDir=$(EscapeSpaces "${INITIATOR[$__replicaDir]}")
escDestDir=$(EscapeSpaces "${TARGET[$__replicaDir]}")
else
sourceDir="${TARGET[$__replicaDir]}"
destDir="${INITIATOR[$__replicaDir]}"
backupArgs="$INITIATOR_BACKUP"
escSourceDir=$(EscapeSpaces "${TARGET[$__replicaDir]}")
escDestDir=$(EscapeSpaces "${INITIATOR[$__replicaDir]}")
fi
if [ "$remoteDelete" == true ]; then
deleteArgs="--delete-after"
fi
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$sourceReplica${INITIATOR[$__deletedListFile]}" ]; then
exclude_list_initiator="--exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$sourceReplica${INITIATOR[$__deletedListFile]}\""
fi
if [ -f "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$destinationReplica${INITIATOR[$__deletedListFile]}" ]; then
exclude_list_target="--exclude-from=\"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$destinationReplica${INITIATOR[$__deletedListFile]}\""
fi
if [ "$REMOTE_OPERATION" == true ]; then
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
if [ "$sourceReplica" == "${INITIATOR[$__type]}" ]; then
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DEFAULT_ARGS $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $RSYNC_TYPE_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" $backupArgs $deleteArgs --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE $exclude_list_initiator $exclude_list_target \"$sourceDir\" $REMOTE_USER@$REMOTE_HOST:\"$escDestDir\" >> $RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP 2>&1"
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DEFAULT_ARGS $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $RSYNC_TYPE_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" $backupArgs $deleteArgs --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE $exclude_list_initiator $exclude_list_target $REMOTE_USER@$REMOTE_HOST:\"$escSourceDir\" \"$destDir\" >> $RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP 2>&1"
fi
else
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" $RSYNC_DEFAULT_ARGS $RSYNC_DRY_ARG $RSYNC_ATTR_ARGS $RSYNC_TYPE_ARGS $SYNC_OPTS $backupArgs $deleteArgs --exclude \"$OSYNC_DIR\" $RSYNC_FULL_PATTERNS $RSYNC_PARTIAL_EXCLUDE $exclude_list_initiator $exclude_list_target \"$sourceDir\" \"$destDir\" >> $RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP 2>&1"
fi
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd"
retval=$?
if [ $retval -ne 0 ] && [ $retval -ne 24 ]; then
Logger "Updating $destinationReplica replica failed. Stopping execution." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
if [ -f "$RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Rsync output:\n$(cat $RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP)" "NOTICE"
fi
exit 1
else
if [ -f "$RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP" ]; then
Logger "List:\n$(cat $RUN_DIR/$PROGRAM.update.$destinationReplica.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
fi
Logger "Updating $destinationReplica replica succeded." "NOTICE"
return 0
fi
}
function _deleteLocal {
local replicaType="${1}" # Replica type
local replicaDir="${2}" # Full path to replica
local deletionDir="${3}" # deletion dir in format .[workdir]/deleted
__CheckArguments 3 $# "$@" #__WITH_PARANOIA_DEBUG
local retval=0
local parentdir
local previousFile=""
local deletionListFromReplica
if [ "$replicaType" == "${INITIATOR[$__type]}" ]; then
deletionListFromReplica="${TARGET[$__type]}"
elif [ "$replicaType" == "${TARGET[$__type]}" ]; then
deletionListFromReplica="${INITIATOR[$__type]}"
else
Logger "Bogus replicaType in [${FUNCNAME[0]}]." "CRITICAL"
exit 1
fi
if [ ! -d "$replicaDir$deletionDir" ] && [ $_DRYRUN == false ]; then
mkdir -p "$replicaDir$deletionDir"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot create local replica deletion directory in [$replicaDir$deletionDir]." "ERROR" $retval
return $retval
fi
fi
while read -r files; do
## On every run, check wheter the next item is already deleted because it is included in a directory already deleted
if [[ "$files" != "$previousFile/"* ]] && [ "$files" != "" ]; then
if [ "$SOFT_DELETE" != false ]; then
if [ $_DRYRUN == false ]; then
if [ -e "$replicaDir$deletionDir/$files" ] || [ -L "$replicaDir$deletionDir/$files" ]; then
rm -rf "${replicaDir:?}$deletionDir/$files"
if [ $? -ne 0 ]; then
Logger "Cannot remove [${replicaDir:?}$deletionDir/$files] on $replicaType." "ERROR"
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
fi
if [ -e "$replicaDir$files" ] || [ -L "$replicaDir$files" ]; then
# In order to keep full path on soft deletion, create parent directories before move
parentdir="$(dirname "$files")"
if [ "$parentdir" != "." ]; then
mkdir -p "$replicaDir$deletionDir/$parentdir"
Logger "Moving deleted file [$replicaDir$files] to [$replicaDir$deletionDir/$parentdir] on $replicaType." "VERBOSE"
mv -f "$replicaDir$files" "$replicaDir$deletionDir/$parentdir"
else
Logger "Moving deleted file [$replicaDir$files] to [$replicaDir$deletionDir] on $replicaType." "VERBOSE"
mv -f "$replicaDir$files" "$replicaDir$deletionDir"
fi
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot move [$replicaDir$files] to deletion directory on $replicaType." "ERROR" $retval
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP"
echo "$files" >> "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__failedDeletedListFile]}"
else
echo "$files" >> "$RUN_DIR/$PROGRAM.delete.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
fi
fi
else
if [ $_DRYRUN == false ]; then
if [ -e "$replicaDir$files" ] || [ -L "$replicaDir$files" ]; then
rm -rf "$replicaDir$files"
retval=$?
Logger "Deleting [$replicaDir$files]." "VERBOSE"
if [ $retval -ne 0 ]; then
Logger "Cannot delete [$replicaDir$files] on $replicaType." "ERROR" $retval
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP"
echo "$files" >> "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$replicaType${INITIATOR[$__failedDeletedListFile]}"
else
echo "$files" >> "$RUN_DIR/$PROGRAM.delete.$replicaType.$SCRIPT_PID.$TSTAMP"
fi
fi
fi
fi
previousFile="$files"
fi
done < "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$deletionListFromReplica${INITIATOR[$__deletedListFile]}"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
return 1
else
return 0
fi
}
function _deleteRemote {
local replicaType="${1}" # Replica type
local replicaDir="${2}" # Full path to replica
local deletionDir="${3}" # deletion dir in format .[workdir]/deleted
__CheckArguments 3 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local escDestDir
local rsyncCmd
local failedDeleteList
local successDeleteList
local deletionListFromReplica
if [ "$replicaType" == "${INITIATOR[$__type]}" ]; then
deletionListFromReplica="${TARGET[$__type]}"
elif [ "$replicaType" == "${TARGET[$__type]}" ]; then
deletionListFromReplica="${INITIATOR[$__type]}"
else
Logger "Bogus replicaType in [${FUNCNAME[0]}]." "CRITICAL"
exit 1
fi
failedDeleteList="${TARGET[$__replicaDir]}${TARGET[$__stateDir]}/$replicaType${TARGET[$__failedDeletedListFile]}"
successDeleteList="${TARGET[$__replicaDir]}${TARGET[$__stateDir]}/$replicaType${TARGET[$__successDeletedListFile]}"
## This is a special coded function. Need to redelcare local functions on remote host, passing all needed variables as escaped arguments to ssh command.
## Anything beetween << ENDSSH and ENDSSH will be executed remotely
# Additionnaly, we need to copy the deletetion list to the remote state folder
escDestDir="$(EscapeSpaces "${TARGET[$__replicaDir]}${TARGET[$__stateDir]}")"
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" -e \"$RSYNC_SSH_CMD\" \"${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/$deletionListFromReplica${INITIATOR[$__deletedListFile]}\" $REMOTE_USER@$REMOTE_HOST:\"$escDestDir/\" >> $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.precopy.$SCRIPT_PID.$TSTAMP 2>&1"
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd" 2>> "$LOG_FILE"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Cannot copy the deletion list to remote replica." "ERROR" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.precopy.$SCRIPT_PID.$TSTAMP" ]; then
Logger "$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.precopy.$SCRIPT_PID.$TSTAMP)" "ERROR"
fi
exit 1
fi
#TODO: change $REPLICA_TYPE to $replicaType as in other remote functions, also applies to all other not standard env variables here
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env _DRYRUN="'$_DRYRUN'" \
env FILE_LIST="'${TARGET[$__replicaDir]}${TARGET[$__stateDir]}/$deletionListFromReplica${INITIATOR[$__deletedListFile]}'" env REPLICA_DIR="'$replicaDir'" env SOFT_DELETE="'$SOFT_DELETE'" \
env DELETION_DIR="'$(EscapeSpaces "$deletionDir")'" env FAILED_DELETE_LIST="'$failedDeleteList'" env SUCCESS_DELETE_LIST="'$successDeleteList'" env REPLICA_TYPE="'$replicaType'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' >> "$RUN_DIR/$PROGRAM.remote_deletion.$SCRIPT_PID.$TSTAMP" 2>&1
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
function _deleteRemoteSub {
## Empty earlier failed delete list
> "$FAILED_DELETE_LIST"
> "$SUCCESS_DELETE_LIST"
parentdir=
previousFile=""
if [ ! -d "$REPLICA_DIR$DELETION_DIR" ] && [ $_DRYRUN == false ]; then
mkdir -p "$REPLICA_DIR$DELETION_DIR"
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot create remote replica deletion directory in [$REPLICA_DIR$DELETION_DIR]." "ERROR" $retval
exit 1
fi
fi
while read -r files; do
## On every run, check wheter the next item is already deleted because it is included in a directory already deleted
if [[ "$files" != "$previousFile/"* ]] && [ "$files" != "" ]; then
if [ "$SOFT_DELETE" != false ]; then
if [ $_DRYRUN == false ]; then
if [ -e "$REPLICA_DIR$DELETION_DIR/$files" ] || [ -L "$REPLICA_DIR$DELETION_DIR/$files" ]; then
rm -rf "$REPLICA_DIR$DELETION_DIR/$files"
if [ $? -ne 0 ]; then
RemoteLogger "Cannot remove [$REPLICA_DIR$DELETION_DIR/$files] on $REPLICA_TYPE." "ERROR"
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$REPLICA_TYPE.$SCRIPT_PID.$TSTAMP"
fi
fi
if [ -e "$REPLICA_DIR$files" ] || [ -L "$REPLICA_DIR$files" ]; then
# In order to keep full path on soft deletion, create parent directories before move
parentdir="$(dirname "$files")"
if [ "$parentdir" != "." ]; then
RemoteLogger "Moving deleted file [$REPLICA_DIR$files] to [$REPLICA_DIR$DELETION_DIR/$parentdir] on $REPLICA_TYPE." "VERBOSE"
mkdir -p "$REPLICA_DIR$DELETION_DIR/$parentdir"
mv -f "$REPLICA_DIR$files" "$REPLICA_DIR$DELETION_DIR/$parentdir"
else
RemoteLogger "Moving deleted file [$REPLICA_DIR$files] to [$REPLICA_DIR$DELETION_DIR] on $REPLICA_TYPE." "VERBOSE"
mv -f "$REPLICA_DIR$files" "$REPLICA_DIR$DELETION_DIR"
fi
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot move [$REPLICA_DIR$files] to deletion directory on $REPLICA_TYPE." "ERROR" $retval
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$REPLICA_TYPE.$SCRIPT_PID.$TSTAMP"
# Using $files instead of $REPLICA_DIR$files here so the list is ready for next run
echo "$files" >> "$FAILED_DELETE_LIST"
else
echo "$files" >> "$SUCCESS_DELETE_LIST"
fi
fi
fi
else
if [ $_DRYRUN == false ]; then
if [ -e "$REPLICA_DIR$files" ] || [ -e "$REPLICA_DIR$files" ]; then
RemoteLogger "Deleting [$REPLICA_DIR$files]." "VERBOSE"
rm -rf "$REPLICA_DIR$files"
retval=$?
if [ $retval -ne 0 ]; then
RemoteLogger "Cannot delete [$REPLICA_DIR$files] on $REPLICA_TYPE." "ERROR" $retval
echo "1" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$REPLICA_TYPE.$SCRIPT_PID.$TSTAMP"
echo "$files" >> "$FAILED_DELETE_LIST"
else
echo "$files" >> "$SUCCESS_DELETE_LIST"
fi
fi
fi
fi
previousFile="$files"
fi
done < "$FILE_LIST"
if [ -f "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.subshellError.$REPLICA_TYPE.$SCRIPT_PID.$TSTAMP" ]; then
return 1
else
return 0
fi
}
_deleteRemoteSub
CleanUp
exit $retval
ENDSSH
retval=$?
if [ -s "$RUN_DIR/$PROGRAM.remote_deletion.$SCRIPT_PID.$TSTAMP" ] && ([ $retval -ne 0 ] || [ "$_LOGGER_VERBOSE" == true ]); then
(
_LOGGER_PREFIX="RR"
Logger "$(cat $RUN_DIR/$PROGRAM.remote_deletion.$SCRIPT_PID.$TSTAMP)" "ERROR"
)
fi
## Copy back the deleted failed file list
rsyncCmd="$(type -p $RSYNC_EXECUTABLE) -r --rsync-path=\"env LC_ALL=C env _REMOTE_TOKEN=$_REMOTE_TOKEN $RSYNC_PATH\" -e \"$RSYNC_SSH_CMD\" --include \"$(dirname ${TARGET[$__stateDir]})\" --include \"${TARGET[$__stateDir]}\" --include \"${TARGET[$__stateDir]}/$replicaType${TARGET[$__failedDeletedListFile]}\" --include \"${TARGET[$__stateDir]}/$replicaType${TARGET[$__successDeletedListFile]}\" --exclude='*' $REMOTE_USER@$REMOTE_HOST:\"$(EscapeSpaces "${TARGET[$__replicaDir]}")\" \"${INITIATOR[$__replicaDir]}\" > \"$RUN_DIR/$PROGRAM.remote_failed_deletion_list_copy.$SCRIPT_PID.$TSTAMP\""
Logger "RSYNC_CMD: $rsyncCmd" "DEBUG"
eval "$rsyncCmd" 2>> "$LOG_FILE"
if [ $? -ne 0 ]; then
Logger "Cannot copy back the failed deletion list to initiator replica." "CRITICAL" $retval
_LOGGER_SILENT=true Logger "Command was [$rsyncCmd]." "WARN"
if [ -f "$RUN_DIR/$PROGRAM.remote_failed_deletion_list_copy.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Comand output: $(cat $RUN_DIR/$PROGRAM.remote_failed_deletion_list_copy.$SCRIPT_PID.$TSTAMP)" "NOTICE"
fi
return 1
fi
return $retval
}
# delete_Propagation(replica type)
function deletionPropagation {
local replicaType="${1}" # Contains replica type: initiator, target where to delete
__CheckArguments 1 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
local replicaDir
local deleteDir
Logger "Propagating deletions to $replicaType replica." "NOTICE"
if [ "$replicaType" == "${INITIATOR[$__type]}" ]; then
if [ $(ArrayContains "${INITIATOR[$__type]}" "${SKIP_DELETION[@]}") -eq 0 ]; then
replicaDir="${INITIATOR[$__replicaDir]}"
deleteDir="${INITIATOR[$__deleteDir]}"
_deleteLocal "${INITIATOR[$__type]}" "$replicaDir" "$deleteDir"
retval=$?
if [ $retval -ne 0 ]; then
Logger "Deletion on $replicaType replica failed." "CRITICAL" $retval
return 1
fi
else
Logger "Skipping deletion on replica $replicaType." "NOTICE"
fi
elif [ "$replicaType" == "${TARGET[$__type]}" ]; then
if [ $(ArrayContains "${TARGET[$__type]}" "${SKIP_DELETION[@]}") -eq 0 ]; then
replicaDir="${TARGET[$__replicaDir]}"
deleteDir="${TARGET[$__deleteDir]}"
if [ "$REMOTE_OPERATION" == true ]; then
_deleteRemote "${TARGET[$__type]}" "$replicaDir" "$deleteDir"
else
_deleteLocal "${TARGET[$__type]}" "$replicaDir" "$deleteDir"
fi
retval=$?
if [ $retval -ne 0 ]; then
Logger "Deletion on $replicaType replica failed." "CRITICAL" $retval
return 1
fi
else
Logger "Skipping deletion on replica $replicaType." "NOTICE"
fi
fi
}
function Initialize {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
Logger "Initializing initiator and target file lists." "NOTICE"
treeList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeAfterFile]}" &
initiatorPid=$!
treeList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__treeAfterFile]}" &
targetPid=$!
ExecTasks "$initiatorPid;$targetPid" "Initialize_1" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Initialize_1"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
Logger "Failed to create initialization treeList files for initiator." "ERROR"
elif [ "$pid" == "$targetPid" ]; then
Logger "Failed to create initialization treeList files for target." "ERROR"
fi
done
exit 1
fi
timestampList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeAfterFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__timestampAfterFile]}" &
initiatorPid=$!
timestampList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${TARGET[$__treeAfterFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__timestampAfterFile]}" &
targetPid=$!
ExecTasks "$initiatorPid;$targetPid" "Initialize_2" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Initialize_2"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
Logger "Failed to create initialization timestamp files for initiator." "ERROR"
elif [ "$pid" == "$targetPid" ]; then
Logger "Failed to create initialization timestamp files for target." "ERROR"
fi
done
exit 1
fi
}
###### Sync function in 9 steps
######
###### Step 0a & 0b: Create current file list of replicas
###### Step 1a & 1b: Create deleted file list of replicas
###### Step 2a & 2b: Create current ctime & mtime file list of replicas
###### Step 3a & 3b: Merge conflict file list
###### Step 4: Update file attributes
###### Step 5a & 5b: Update replicas
###### Step 6a & 6b: Propagate deletions on replicas
###### Step 7a & 7b: Create after run file list of replicas
###### Step 8a & 8b: Create after run ctime & mtime file list of replicas
function Sync {
local syncType="${1}" # Optional sync type. By default, sync is bidirectional.
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local resumeCount
local resumeInitiator
local resumeTarget
local rsyncRemoteDelete=false
local initiatorPid
local targetPid
local initiatorFail
local targetFail
local pid
Logger "Starting synchronization task." "NOTICE"
if [ "$RESUME_SYNC" != false ]; then
if [ -f "${INITIATOR[$__resumeCount]}" ]; then
resumeCount=$(cat "${INITIATOR[$__resumeCount]}")
else
resumeCount=0
fi
if [ $resumeCount -lt $RESUME_TRY ]; then
if [ -f "${INITIATOR[$__initiatorLastActionFile]}" ]; then
resumeInitiator=$(cat "${INITIATOR[$__initiatorLastActionFile]}")
else
resumeInitiator="${SYNC_ACTION[9]}"
fi
if [ -f "${INITIATOR[$__targetLastActionFile]}" ]; then
resumeTarget=$(cat "${INITIATOR[$__targetLastActionFile]}")
else
resumeTarget="${SYNC_ACTION[9]}"
fi
if [ "$resumeInitiator" != "${SYNC_ACTION[9]}" ]; then
Logger "Trying to resume aborted execution on $($STAT_CMD "${INITIATOR[$__initiatorLastActionFile]}") at task [$resumeInitiator] for initiator. [$resumeCount] previous tries." "NOTICE"
echo $((resumeCount+1)) > "${INITIATOR[$__resumeCount]}"
else
resumeInitiator="none"
fi
if [ "$resumeTarget" != "${SYNC_ACTION[9]}" ]; then
Logger "Trying to resume aborted execution on $($STAT_CMD "${INITIATOR[$__targetLastActionFile]}") as task [$resumeTarget] for target. [$resumeCount] previous tries." "NOTICE"
echo $((resumeCount+1)) > "${INITIATOR[$__resumeCount]}"
else
resumeTarget="none"
fi
else
if [ $RESUME_TRY -ne 0 ]; then
Logger "Will not resume aborted execution. Too many resume tries [$resumeCount]." "WARN"
fi
echo "0" > "${INITIATOR[$__resumeCount]}"
resumeInitiator="none"
resumeTarget="none"
fi
else
resumeInitiator="none"
resumeTarget="none"
fi
# If using unidirectional sync, let's point resumes at step 5 directly
if [ "$SYNC_TYPE" == "initiator2target" ]; then
resumeInitiator="${SYNC_ACTION[5]}"
resumeTarget="${SYNC_ACTION[6]}"
rsyncRemoteDelete=true
elif [ "$SYNC_TYPE" == "target2initiator" ]; then
resumeInitiator="${SYNC_ACTION[6]}"
resumeTarget="${SYNC_ACTION[5]}"
rsyncRemoteDelete=true
fi
################################################################################################################################################# Actual sync begins here
## Step 0a & 0b
if [ "$resumeInitiator" == "none" ] || [ "$resumeTarget" == "none" ] || [ "$resumeInitiator" == "${SYNC_ACTION[0]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[0]}" ]; then
if [ "$resumeInitiator" == "none" ] || [ "$resumeInitiator" == "${SYNC_ACTION[0]}" ]; then
treeList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeCurrentFile]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "none" ] || [ "$resumeTarget" == "${SYNC_ACTION[0]}" ]; then
treeList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__treeCurrentFile]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_treeListBefore" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_treeListBefore"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[0]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[0]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[1]}"
resumeTarget="${SYNC_ACTION[1]}"
fi
fi
## Step 1a & 1b
if [ "$resumeInitiator" == "${SYNC_ACTION[1]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[1]}" ]; then
if [ "$resumeInitiator" == "${SYNC_ACTION[1]}" ]; then
deleteList "${INITIATOR[$__type]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "${SYNC_ACTION[1]}" ]; then
deleteList "${TARGET[$__type]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_deleteList" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_deleteList"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[1]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[2]}"
resumeTarget="${SYNC_ACTION[2]}"
fi
fi
## Step 2a & 2b
if [ "$resumeInitiator" == "${SYNC_ACTION[2]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[2]}" ]; then
#if [[ "$RSYNC_ATTR_ARGS" == *"-X"* ]] || [[ "$RSYNC_ATTR_ARGS" == *"-A"* ]] || [ "$LOG_CONFLICTS" == true ]; then
#TODO: refactor in v1.3 with syncattrs
if [ "$LOG_CONFLICTS" == true ]; then
if [ "$resumeInitiator" == "${SYNC_ACTION[2]}" ]; then
timestampList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeCurrentFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__timestampCurrentFile]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "${SYNC_ACTION[2]}" ]; then
timestampList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${TARGET[$__treeCurrentFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${TARGET[$__timestampCurrentFile]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_timestampListBefore" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_timestampListBefore"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[2]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[3]}"
resumeTarget="${SYNC_ACTION[3]}"
fi
else
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[3]}"
resumeTarget="${SYNC_ACTION[3]}"
fi
fi
## Step 3a & 3b
if [ "$resumeInitiator" == "${SYNC_ACTION[3]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[3]}" ]; then
if [ "$LOG_CONFLICTS" == true ]; then
conflictList "${INITIATOR[$__timestampCurrentFile]}" "${INITIATOR[$__timestampAfterFileNoSuffix]}" &
ExecTasks $! "${FUNCNAME[0]}_conflictList" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[3]}" > "${INITIATOR[$__targetLastActionFile]}"
exit 1
else
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[4]}"
resumeTarget="${SYNC_ACTION[4]}"
fi
else
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[4]}"
resumeTarget="${SYNC_ACTION[4]}"
fi
fi
## Step 4
if [ "$resumeInitiator" == "${SYNC_ACTION[4]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[4]}" ]; then
if [[ "$RSYNC_ATTR_ARGS" == *"-X"* ]] || [[ "$RSYNC_ATTR_ARGS" == *"-A"* ]]; then
syncAttrs "${INITIATOR[$__replicaDir]}" "${TARGET[$__replicaDir]}" &
ExecTasks $! "${FUNCNAME[0]}_syncAttrs" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[4]}" > "${INITIATOR[$__targetLastActionFile]}"
exit 1
else
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[5]}"
resumeTarget="${SYNC_ACTION[5]}"
fi
else
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[5]}"
resumeTarget="${SYNC_ACTION[5]}"
fi
fi
## Step 5a & 5b
if [ "$resumeInitiator" == "${SYNC_ACTION[5]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[5]}" ]; then
if [ "$CONFLICT_PREVALANCE" == "${TARGET[$__type]}" ]; then
if [ "$resumeTarget" == "${SYNC_ACTION[5]}" ]; then
syncUpdate "${TARGET[$__type]}" "${INITIATOR[$__type]}" $rsyncRemoteDelete &
ExecTasks $! "${FUNCNAME[0]}_syncUpdate_initiator" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeTarget="${SYNC_ACTION[5]}"
exit 1
else
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeTarget="${SYNC_ACTION[6]}"
fi
fi
if [ "$resumeInitiator" == "${SYNC_ACTION[5]}" ]; then
syncUpdate "${INITIATOR[$__type]}" "${TARGET[$__type]}" $rsyncRemoteDelete &
ExecTasks $! "${FUNCNAME[0]}_syncUpdate_target" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__initiatorLastActionFile]}"
resumeInitiator="${SYNC_ACTION[5]}"
exit 1
else
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__initiatorLastActionFile]}"
resumeInitiator="${SYNC_ACTION[6]}"
fi
fi
else
if [ "$resumeInitiator" == "${SYNC_ACTION[5]}" ]; then
syncUpdate "${INITIATOR[$__type]}" "${TARGET[$__type]}" $rsyncRemoteDelete &
ExecTasks $! "${FUNCNAME[0]}_syncUpdate_target" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__initiatorLastActionFile]}"
resumeInitiator="${SYNC_ACTION[5]}"
exit 1
else
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__initiatorLastActionFile]}"
resumeInitiator="${SYNC_ACTION[6]}"
fi
fi
if [ "$resumeTarget" == "${SYNC_ACTION[5]}" ]; then
syncUpdate "${TARGET[$__type]}" "${INITIATOR[$__type]}" $rsyncRemoteDelete &
ExecTasks $! "${FUNCNAME[0]}_syncUpdate_initiator" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
echo "${SYNC_ACTION[5]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeTarget="${SYNC_ACTION[5]}"
exit 1
else
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeTarget="${SYNC_ACTION[6]}"
fi
fi
fi
fi
# If SYNC_TYPE is not bidirectional, skip all other steps
if [ "$SYNC_TYPE" == "initiator2target" ] || [ "$SYNC_TYPE" == "target2initiator" ]; then
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[9]}"
resumeTarget="${SYNC_ACTION[9]}"
fi
## Step 6a & 6b
if [ "$resumeInitiator" == "${SYNC_ACTION[6]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[6]}" ]; then
if [ "$resumeInitiator" == "${SYNC_ACTION[6]}" ]; then
deletionPropagation "${INITIATOR[$__type]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "${SYNC_ACTION[6]}" ]; then
deletionPropagation "${TARGET[$__type]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_deletionPropagation" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_deletionPropagation"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[6]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[7]}"
resumeTarget="${SYNC_ACTION[7]}"
fi
fi
## Step 7a & 7b
if [ "$resumeInitiator" == "${SYNC_ACTION[7]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[7]}" ]; then
if [ "$resumeInitiator" == "${SYNC_ACTION[7]}" ]; then
treeList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeAfterFile]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "${SYNC_ACTION[7]}" ]; then
treeList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${INITIATOR[$__treeAfterFile]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_treeListAfter" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_treeListAfter"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[7]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[8]}"
resumeTarget="${SYNC_ACTION[8]}"
fi
fi
# Step 8a & 8b
if [ "$resumeInitiator" == "${SYNC_ACTION[8]}" ] || [ "$resumeTarget" == "${SYNC_ACTION[8]}" ]; then
#if [[ "$RSYNC_ATTR_ARGS" == *"-X"* ]] || [[ "$RSYNC_ATTR_ARGS" == *"-A"* ]] || [ "$LOG_CONFLICTS" == true ]; then
#TODO: refactor in v1.3 with syncattrs
if [ "$LOG_CONFLICTS" == true ]; then
if [ "$resumeInitiator" == "${SYNC_ACTION[8]}" ]; then
timestampList "${INITIATOR[$__replicaDir]}" "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__treeAfterFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__type]}${INITIATOR[$__timestampAfterFile]}" &
initiatorPid=$!
fi
if [ "$resumeTarget" == "${SYNC_ACTION[8]}" ]; then
timestampList "${TARGET[$__replicaDir]}" "${TARGET[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${TARGET[$__treeAfterFile]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${TARGET[$__type]}${TARGET[$__timestampAfterFile]}" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "Sync_timestampListAfter" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ]; then
IFS=';' read -r -a pidArray <<< "$WAIT_FOR_TASK_COMPLETION_Sync_timeStampListAfter"
initiatorFail=false
targetFail=false
for pid in "${pidArray[@]}"; do
pid=${pid%:*}
if [ "$pid" == "$initiatorPid" ]; then
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__initiatorLastActionFile]}"
initiatorFail=true
elif [ "$pid" == "$targetPid" ]; then
echo "${SYNC_ACTION[8]}" > "${INITIATOR[$__targetLastActionFile]}"
targetFail=true
fi
done
if [ $initiatorFail == false ]; then
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__initiatorLastActionFile]}"
fi
if [ $targetFail == false ]; then
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__targetLastActionFile]}"
fi
exit 1
else
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[9]}"
resumeTarget="${SYNC_ACTION[9]}"
fi
else
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__initiatorLastActionFile]}"
echo "${SYNC_ACTION[9]}" > "${INITIATOR[$__targetLastActionFile]}"
resumeInitiator="${SYNC_ACTION[9]}"
resumeTarget="${SYNC_ACTION[9]}"
fi
fi
Logger "Finished synchronization task." "NOTICE"
echo "0" > "${INITIATOR[$__resumeCount]}"
}
function _SoftDeleteLocal {
local replicaType="${1}" # replica type (initiator, target)
local replicaDeletionPath="${2}" # Contains the full path to softdelete / backup directory without ending slash
local changeTime="${3}" # Delete files older than changeTime days
local deletionType="${4}" # Trivial deletion type string
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
if [ "$LOCAL_OS" == "Busybox" ] || [ "$LOCAL_OS" == "Android" ]; then
Logger "Skipping $deletionType deletion on $replicaType. Busybox find -ctime not supported." "NOTICE"
return 0
fi
if [ -d "$replicaDeletionPath" ]; then
if [ $_DRYRUN == true ]; then
Logger "Listing files older than $changeTime days on $replicaType replica for $deletionType deletion. Does not remove anything." "NOTICE"
else
Logger "Removing files older than $changeTime days on $replicaType replica for $deletionType deletion." "NOTICE"
fi
$FIND_CMD "$replicaDeletionPath" -type f -ctime +"$changeTime" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP" 2>> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP"
while IFS='' read -r file; do
Logger "On $replicaType will delete file [$file]" "VERBOSE"
if [ $_DRYRUN == false ]; then
rm -f "$file" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
fi
done < "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP"
$FIND_CMD "$replicaDeletionPath" -type d -empty -ctime +"$changeTime" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP" 2>> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP"
while IFS='' read -r directory; do
Logger "On $replicaType will delete empty directory [$file]" "VERBOSE"
if [ $_DRYRUN == false ]; then
rm -df "$directory" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
fi
done < "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP"
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
Logger "Error while executing cleanup on $replicaType replica." "ERROR" $retval
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
else
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
Logger "File cleanup complete on $replicaType replica." "NOTICE"
fi
elif [ -d "$replicaDeletionPath" ] && ! [ -w "$replicaDeletionPath" ]; then
Logger "The $replicaType replica dir [$replicaDeletionPath] is not writable. Cannot clean old files." "ERROR"
else
Logger "The $replicaType replica dir [$replicaDeletionPath] does not exist. Skipping cleaning of old files." "VERBOSE"
fi
}
function _SoftDeleteRemote {
local replicaType="${1}"
local replicaDeletionPath="${2}" # Contains the full path to softdelete / backup directory without ending slash
local changeTime="${3}" # Delete files older than changeTime days
local deletionType="${4}" # Trivial deletion type string
__CheckArguments 4 $# "$@" #__WITH_PARANOIA_DEBUG
local retval
if [ "$REMOTE_OS" == "BusyBox" ] || [ "$REMOTE_OS" == "Android" ]; then
Logger "Skipping $deletionType deletion on $replicaType. Busybox find -ctime not supported." "NOTICE"
return 0
fi
CheckConnectivity3rdPartyHosts
CheckConnectivityRemoteHost
if [ $_DRYRUN == true ]; then
Logger "Listing files older than $changeTime days on $replicaType replica for $deletionType deletion. Does not remove anything." "NOTICE"
else
Logger "Removing files older than $changeTime days on $replicaType replica for $deletionType deletion." "NOTICE"
fi
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env _DRYRUN="'$_DRYRUN'" env replicaType="'$replicaType'" env replicaDeletionPath="'$replicaDeletionPath'" env changeTime="'$changeTime'" env REMOTE_FIND_CMD="'$REMOTE_FIND_CMD'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### IsInteger SUBSET ####
include #### HumanToNumeric SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
function _SoftDeleteRemoteSub {
if [ -d "$replicaDeletionPath" ]; then
$REMOTE_FIND_CMD "$replicaDeletionPath" -type f -ctime +"$changeTime" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP" 2>> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP"
while IFS='' read -r file; do
RemoteLogger "On $replicaType will delete file [$file]" "VERBOSE"
if [ $_DRYRUN == false ]; then
rm -f "$file" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
fi
done < "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP"
$REMOTE_FIND_CMD "$replicaDeletionPath" -type d -empty -ctime +"$changeTime" > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP" 2>> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP"
while IFS='' read -r directory; do
RemoteLogger "On $replicaType will delete empty directory [$file]" "VERBOSE"
if [ $_DRYRUN == false ]; then
rm -df "$directory" >> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" 2>&1
fi
done < "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteList.$replicaType.$SCRIPT_PID.$TSTAMP"
if [ -s "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP" ]; then
RemoteLogger "Error while executing cleanup on $replicaType replica." "ERROR" $retval
RemoteLogger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
exit 1
else
RemoteLogger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.deleteErrors.$replicaType.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
RemoteLogger "File cleanup complete on $replicaType replica." "NOTICE"
exit 0
fi
elif [ -d "$replicaDeletionPath" ] && ! [ -w "$replicaDeletionPath" ]; then
RemoteLogger "The $replicaType replica dir [$replicaDeletionPath] is not writable. Cannot clean old files." "ERROR"
exit 1
else
RemoteLogger "The $replicaType replica dir [$replicaDeletionPath] does not exist. Skipping cleaning of old files." "VERBOSE"
exit 0
fi
}
_SoftDeleteRemoteSub
retval=$?
CleanUp
exit $retval
ENDSSH
retval=$?
if [ $retval -ne 0 ]; then
Logger "Error while executing cleanup on remote $replicaType replica." "ERROR" $retval
(
_LOGGER_PREFIX=""
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "WARN"
)
else
Logger "Cleanup complete on $replicaType replica." "NOTICE"
(
_LOGGER_PREFIX=""
Logger "Command output:\n$(cat $RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$replicaType.$SCRIPT_PID.$TSTAMP)" "VERBOSE"
)
fi
}
function SoftDelete {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local initiatorPid
local targetPid
if [ "$CONFLICT_BACKUP" != false ] && [ $CONFLICT_BACKUP_DAYS -ne 0 ]; then
Logger "Running conflict backup cleanup." "NOTICE"
_SoftDeleteLocal "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__backupDir]}" $CONFLICT_BACKUP_DAYS "conflict backup" &
initiatorPid=$!
if [ "$REMOTE_OPERATION" != true ]; then
_SoftDeleteLocal "${TARGET[$__type]}" "${TARGET[$__replicaDir]}${TARGET[$__backupDir]}" $CONFLICT_BACKUP_DAYS "conflict backup" &
targetPid=$!
else
_SoftDeleteRemote "${TARGET[$__type]}" "${TARGET[$__replicaDir]}${TARGET[$__backupDir]}" $CONFLICT_BACKUP_DAYS "conflict backup" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "${FUNCNAME[0]}_conflictBackup" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ] && [ "$(eval echo \"\$HARD_MAX_EXEC_TIME_REACHED_${FUNCNAME[0]}\")" == true ]; then
exit 1
fi
fi
if [ "$SOFT_DELETE" != false ] && [ $SOFT_DELETE_DAYS -ne 0 ]; then
Logger "Running soft deletion cleanup." "NOTICE"
_SoftDeleteLocal "${INITIATOR[$__type]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__deleteDir]}" $SOFT_DELETE_DAYS "softdelete" &
initiatorPid=$!
if [ "$REMOTE_OPERATION" != true ]; then
_SoftDeleteLocal "${TARGET[$__type]}" "${TARGET[$__replicaDir]}${TARGET[$__deleteDir]}" $SOFT_DELETE_DAYS "softdelete" &
targetPid=$!
else
_SoftDeleteRemote "${TARGET[$__type]}" "${TARGET[$__replicaDir]}${TARGET[$__deleteDir]}" $SOFT_DELETE_DAYS "softdelete" &
targetPid=$!
fi
ExecTasks "$initiatorPid;$targetPid" "${FUNCNAME[0]}_softDelete" false 0 0 $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME false $SLEEP_TIME $KEEP_LOGGING
if [ $? -ne 0 ] && [ "$(eval echo \"\$HARD_MAX_EXEC_TIME_REACHED_${FUNCNAME[0]}\")" == true ]; then
exit 1
fi
fi
}
function _TriggerInitiatorRunLocal {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local PUSH_FILE
PUSH_FILE="${INITIATOR[$__replicaDir]}${INITIATOR[$__updateTriggerFile]}"
if [ -d $(dirname "$PUSH_FILE") ]; then
echo "$INSTANCE_ID#$(date '+%Y%m%dT%H%M%S.%N')" >> "$PUSH_FILE" 2> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.error.$SCRIPT_PID.$TSTAMP"
if [ $? -ne 0 ]; then
Logger "Could not notify local initiator of file changes." "ERROR"
Logger "$(cat "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.error.$SCRIPT_PID.$TSTAMP")" "ERROR"
return 1
else
Logger "Initiator of instance [$INSTANCE_ID] should be notified of file changes now." "NOTICE"
fi
return 0
else
Logger "Cannot fin initiator replica dir [$dirname ("$PUSH_FILE")]." "ERROR"
return 1
fi
}
function _TriggerInitiatorRunRemote {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
$SSH_CMD env _REMOTE_TOKEN="$_REMOTE_TOKEN" \
env _DEBUG="'$_DEBUG'" env _PARANOIA_DEBUG="'$_PARANOIA_DEBUG'" env _LOGGER_SILENT="'$_LOGGER_SILENT'" env _LOGGER_VERBOSE="'$_LOGGER_VERBOSE'" env _LOGGER_PREFIX="'$_LOGGER_PREFIX'" env _LOGGER_ERR_ONLY="'$_LOGGER_ERR_ONLY'" \
env _REMOTE_EXECUTION="true" env PROGRAM="'$PROGRAM'" env SCRIPT_PID="'$SCRIPT_PID'" env TSTAMP="'$TSTAMP'" \
env INSTANCE_ID="'$INSTANCE_ID'" env PUSH_FILE="'$(EscapeSpaces "${INITIATOR[$__replicaDir]}${INITIATOR[$__updateTriggerFile]}")'" \
env LC_ALL=C $COMMAND_SUDO' bash -s' << 'ENDSSH' > "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.$SCRIPT_PID.$TSTAMP" 2> "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.error.$SCRIPT_PID.$TSTAMP"
include #### RUN_DIR SUBSET ####
include #### DEBUG SUBSET ####
include #### TrapError SUBSET ####
include #### RemoteLogger SUBSET ####
include #### CleanUp SUBSET ####
if [ -d $(dirname "$PUSH_FILE") ]; then
#WIP no %N on BSD (also in local)
echo "$INSTANCE_ID#$(date '+%Y%m%dT%H%M%S.%N')" >> "$PUSH_FILE"
retval=$?
else
RemoteLogger "Cannot find initiator replica dir [$(dirname "$PUSH_FILE")]." "ERROR"
retval=1
fi
exit $retval
ENDSSH
if [ $? -ne 0 ]; then
Logger "Could not notifiy remote initiator of file changes." "ERROR"
Logger "SSH_CMD [$SSH_CMD]" "DEBUG"
(
_LOGGER_PREFIX="RR"
Logger "$(cat "$RUN_DIR/$PROGRAM.${FUNCNAME[0]}.error.$SCRIPT_PID.$TSTAMP")" "ERROR"
)
return 1
else
Logger "Initiator of instance [$INSTANCE_ID] should be notified of file changes now." "NOTICE"
fi
return 0
}
function TriggerInitiatorRun {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
if [ "$REMOTE_OPERATION" != false ]; then
_TriggerInitiatorRunRemote
else
_TriggerInitiatorRunLocal
fi
}
function _SummaryFromRsyncFile {
local replicaPath="${1}"
local summaryFile="${2}"
local direction="${3}"
__CheckArguments 3 $# "$@" #__WITH_PARANOIA_DEBUG
if [ -f "$summaryFile" ]; then
while read -r file; do
# grep -E "^<|^>|^\." = Remove all lines that do not begin with '<', '>' or '.' to deal with a bizarre bug involving rsync 3.0.6 / CentOS 6 and --skip-compress showing 'adding zip' line for every skipped compressed extension
if echo "$file" | grep -E "^<|^>|^\." > /dev/null 2>&1; then
# awk removes first part of line until space, then show all others
Logger "+ $direction $replicaPath$(echo $file | awk '{for (i=2; i<NF; i++) printf $i " "; print $NF}')" "ALWAYS"
if [ "$direction" == ">>" ]; then
TARGET_UPDATES_COUNT=$((TARGET_UPDATES_COUNT+1))
elif [ "$direction" == "<<" ]; then
INITIATOR_UPDATES_COUNT=$((INITIATOR_UPDATES_COUNT+1))
fi
fi
if echo "$file" | grep -E "\*deleting" > /dev/null 2>&1; then
if [ "$direction" == ">>" ]; then
Logger "- $direction $replicaPath$(echo $file | awk '{print $2}')" "ALWAYS"
TARGET_DELETES_COUNT=$((TARGET_DELETES_COUNT+1))
elif [ "$direction" == "<<" ]; then
Logger "- $direction $replicaPath$(echo $file | awk '{print $2}')" "ALWAYS"
INITIATOR_DELETES_COUNT=$((INITIATOR_DELETES_COUNT+1))
fi
fi
done < "$summaryFile"
fi
}
function _SummaryFromDeleteFile {
local replicaPath="${1}"
local summaryFile="${2}"
local direction="${3}"
__CheckArguments 3 $# "$@" #__WITH_PARANOIA_DEBUG
if [ -f "$summaryFile" ]; then
while read -r file; do
Logger "- $direction $replicaPath$file" "ALWAYS"
if [ "$direction" == ">>" ]; then
TARGET_DELETES_COUNT=$((TARGET_DELETES_COUNT+1))
elif [ "$direction" == "<<" ]; then
INITIATOR_DELETES_COUNT=$((INITIATOR_DELETES_COUNT+1))
fi
done < "$summaryFile"
fi
}
function Summary {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
(
_LOGGER_PREFIX=""
Logger "Attributes only updates: INITIATOR << >> TARGET" "ALWAYS"
_SummaryFromRsyncFile "${TARGET[$__replicaDir]}" "$RUN_DIR/$PROGRAM.attr-update.target.$SCRIPT_PID.$TSTAMP" ">>"
_SummaryFromRsyncFile "${INITIATOR[$__replicaDir]}" "$RUN_DIR/$PROGRAM.attr-update.initiator.$SCRIPT_PID.$TSTAMP" "<<"
Logger "File transfers and simple deletions: INITIATOR << >> TARGET (may include file ownership and timestamp attributes)" "ALWAYS"
_SummaryFromRsyncFile "${TARGET[$__replicaDir]}" "$RUN_DIR/$PROGRAM.update.target.$SCRIPT_PID.$TSTAMP" ">>"
_SummaryFromRsyncFile "${INITIATOR[$__replicaDir]}" "$RUN_DIR/$PROGRAM.update.initiator.$SCRIPT_PID.$TSTAMP" "<<"
Logger "File deletions: INITIATOR << >> TARGET" "ALWAYS"
if [ "$REMOTE_OPERATION" == true ]; then
_SummaryFromDeleteFile "${TARGET[$__replicaDir]}" "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/target${TARGET[$__successDeletedListFile]}" "- >>"
else
_SummaryFromDeleteFile "${TARGET[$__replicaDir]}" "$RUN_DIR/$PROGRAM.delete.target.$SCRIPT_PID.$TSTAMP" ">>"
fi
_SummaryFromDeleteFile "${INITIATOR[$__replicaDir]}" "$RUN_DIR/$PROGRAM.delete.initiator.$SCRIPT_PID.$TSTAMP" "<<"
Logger "Initiator has $INITIATOR_UPDATES_COUNT updates." "ALWAYS"
Logger "Target has $TARGET_UPDATES_COUNT updates." "ALWAYS"
Logger "Initiator has $INITIATOR_DELETES_COUNT deletions." "ALWAYS"
Logger "Target has $TARGET_DELETES_COUNT deletions." "ALWAYS"
)
}
function LogConflicts {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
local subject
local body
local conflicts=0
if [ -f "$RUN_DIR/$PROGRAM.conflictList.compare.$SCRIPT_PID.$TSTAMP" ]; then
Logger "File conflicts: INITIATOR << >> TARGET" "ALWAYS"
> "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__conflictListFile]}"
while read -r line; do
echo "${INITIATOR[$__replicaDir]}$(echo $line | awk -F';' '{print $1}') << >> ${TARGET[$__replicaDir]}$(echo $line | awk -F';' '{print $1}')" >> "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__conflictListFile]}"
conflicts=$((conflicts+1))
done < "$RUN_DIR/$PROGRAM.conflictList.compare.$SCRIPT_PID.$TSTAMP"
(
_LOGGER_PREFIX=""
Logger "$(cat "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__conflictListFile]}")" "ALWAYS"
)
Logger "There are $conflicts conflictual files." "ALWAYS"
else
Logger "No are no conflicatual files." "ALWAYS"
fi
if [ "$ALERT_CONFLICTS" == true ] && [ -s "$RUN_DIR/$PROGRAM.conflictList.compare.$SCRIPT_PID.$TSTAMP" ]; then
subject="Conflictual files found in [$INSTANCE_ID]"
body="List of conflictual files:"$'\n'"$(cat "${INITIATOR[$__replicaDir]}${INITIATOR[$__stateDir]}/${INITIATOR[$__conflictListFile]}")"
SendEmail "$subject" "$body" "$DESTINATION_MAILS" "" "$SENDER_MAIL" "$SMTP_SERVER" "$SMTP_PORT" "$SMTP_ENCRYPTION" "$SMTP_USER" "$SMTP_PASSWORD"
fi
}
function Init {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
# Set error exit code if a piped command fails
set -o pipefail
set -o errtrace
# Do not use exit and quit traps if osync runs in monitor mode
if [ $_SYNC_ON_CHANGES == false ]; then
trap TrapStop INT HUP TERM QUIT
trap TrapQuit EXIT
else
trap TrapQuit TERM EXIT HUP QUIT
fi
local uri
local hosturiandpath
local hosturi
## Test if target dir is a ssh uri, and if yes, break it down it its values
if [ "${TARGET_SYNC_DIR:0:6}" == "ssh://" ]; then
REMOTE_OPERATION=true
# remove leadng 'ssh://'
uri=${TARGET_SYNC_DIR#ssh://*}
if [[ "$uri" == *"@"* ]]; then
# remove everything after '@'
REMOTE_USER=${uri%@*}
else
REMOTE_USER=$LOCAL_USER
fi
if [ "$SSH_RSA_PRIVATE_KEY" == "" ]; then
if [ ! -f "$SSH_PASSWORD_FILE" ]; then
# Assume that there might exist a standard rsa key
SSH_RSA_PRIVATE_KEY=~/.ssh/id_rsa
fi
fi
# remove everything before '@'
hosturiandpath=${uri#*@}
# remove everything after first '/'
hosturi=${hosturiandpath%%/*}
if [[ "$hosturi" == *":"* ]]; then
REMOTE_PORT=${hosturi##*:}
else
REMOTE_PORT=22
fi
REMOTE_HOST=${hosturi%%:*}
# remove everything before first '/'
TARGET_SYNC_DIR=${hosturiandpath#*/}
elif [ "${INITIATOR_SYNC_DIR:0:6}" == "ssh://" ]; then
REMOTE_OPERATION=true
# remove leadng 'ssh://'
uri=${INITIATOR_SYNC_DIR#ssh://*}
if [[ "$uri" == *"@"* ]]; then
# remove everything after '@'
REMOTE_USER=${uri%@*}
else
REMOTE_USER=$LOCAL_USER
fi
if [ "$SSH_RSA_PRIVATE_KEY" == "" ]; then
if [ ! -f "$SSH_PASSWORD_FILE" ]; then
# Assume that there might exist a standard rsa key
SSH_RSA_PRIVATE_KEY=~/.ssh/id_rsa
fi
fi
# remove everything before '@'
hosturiandpath=${uri#*@}
# remove everything after first '/'
hosturi=${hosturiandpath%%/*}
if [[ "$hosturi" == *":"* ]]; then
REMOTE_PORT=${hosturi##*:}
else
REMOTE_PORT=22
fi
REMOTE_HOST=${hosturi%%:*}
# remove everything before first '/'
INITIATOR_SYNC_DIR=${hosturiandpath#*/}
else
REMOTE_OPERATION=false
fi
if [ "$INITIATOR_SYNC_DIR" == "" ] || [ "$TARGET_SYNC_DIR" == "" ]; then
Logger "Initiator or target path empty." "CRITICAL"
exit 1
fi
## Make sure there is only one trailing slash on path
INITIATOR_SYNC_DIR="${INITIATOR_SYNC_DIR%/}/"
TARGET_SYNC_DIR="${TARGET_SYNC_DIR%/}/"
# Expand ~ if exists
INITIATOR_SYNC_DIR="${INITIATOR_SYNC_DIR/#\~/$HOME}"
TARGET_SYNC_DIR="${TARGET_SYNC_DIR/#\~/$HOME}"
SSH_RSA_PRIVATE_KEY="${SSH_RSA_PRIVATE_KEY/#\~/$HOME}"
SSH_PASSWORD_FILE="${SSH_PASSWORD_FILE/#\~/$HOME}"
## Replica format
## Why the f*** does bash not have simple objects ?
# Local variables used for state filenames
local lockFilename="lock"
local stateDir="state"
local backupDir="backup"
local deleteDir="deleted"
local partialDir="_partial"
local lastAction="last-action"
local resumeCount="resume-count"
local pushFile=".osync-update.push"
if [ "$_DRYRUN" == true ]; then
local drySuffix="-dry"
else
local drySuffix=
fi
# The following associative like array definitions are used for bash ver < 4 compat
readonly __type=0
readonly __replicaDir=1
readonly __lockFile=2
readonly __stateDir=3
readonly __backupDir=4
readonly __deleteDir=5
readonly __partialDir=6
readonly __initiatorLastActionFile=7
readonly __targetLastActionFile=8
readonly __resumeCount=9
readonly __treeCurrentFile=10
readonly __treeAfterFile=11
readonly __treeAfterFileNoSuffix=12
readonly __deletedListFile=13
readonly __failedDeletedListFile=14
readonly __successDeletedListFile=15
readonly __timestampCurrentFile=16
readonly __timestampAfterFile=17
readonly __timestampAfterFileNoSuffix=18
readonly __conflictListFile=19
readonly __updateTriggerFile=20
INITIATOR=()
INITIATOR[$__type]='initiator'
INITIATOR[$__replicaDir]="$INITIATOR_SYNC_DIR"
INITIATOR[$__lockFile]="$INITIATOR_SYNC_DIR$OSYNC_DIR/$lockFilename"
INITIATOR[$__stateDir]="$OSYNC_DIR/$stateDir"
INITIATOR[$__backupDir]="$OSYNC_DIR/$backupDir"
INITIATOR[$__deleteDir]="$OSYNC_DIR/$deleteDir"
INITIATOR[$__partialDir]="$OSYNC_DIR/$partialDir"
INITIATOR[$__initiatorLastActionFile]="$INITIATOR_SYNC_DIR$OSYNC_DIR/$stateDir/initiator-$lastAction-$INSTANCE_ID$drySuffix"
INITIATOR[$__targetLastActionFile]="$INITIATOR_SYNC_DIR$OSYNC_DIR/$stateDir/target-$lastAction-$INSTANCE_ID$drySuffix"
INITIATOR[$__resumeCount]="$INITIATOR_SYNC_DIR$OSYNC_DIR/$stateDir/$resumeCount-$INSTANCE_ID$drySuffix"
INITIATOR[$__treeCurrentFile]="-tree-current-$INSTANCE_ID$drySuffix"
INITIATOR[$__treeAfterFile]="-tree-after-$INSTANCE_ID$drySuffix"
INITIATOR[$__treeAfterFileNoSuffix]="-tree-after-$INSTANCE_ID"
INITIATOR[$__deletedListFile]="-deleted-list-$INSTANCE_ID$drySuffix"
INITIATOR[$__failedDeletedListFile]="-failed-delete-$INSTANCE_ID$drySuffix"
INITIATOR[$__successDeletedListFile]="-success-delete-$INSTANCE_ID$drySuffix"
INITIATOR[$__timestampCurrentFile]="-timestamps-current-$INSTANCE_ID$drySuffix"
INITIATOR[$__timestampAfterFile]="-timestamps-after-$INSTANCE_ID$drySuffix"
INITIATOR[$__timestampAfterFileNoSuffix]="-timestamps-after-$INSTANCE_ID"
INITIATOR[$__conflictListFile]="conflicts-$INSTANCE_ID$drySuffix"
INITIATOR[$__updateTriggerFile]="$pushFile"
TARGET=()
TARGET[$__type]='target'
TARGET[$__replicaDir]="$TARGET_SYNC_DIR"
TARGET[$__lockFile]="$TARGET_SYNC_DIR$OSYNC_DIR/$lockFilename"
TARGET[$__stateDir]="$OSYNC_DIR/$stateDir"
TARGET[$__backupDir]="$OSYNC_DIR/$backupDir"
TARGET[$__deleteDir]="$OSYNC_DIR/$deleteDir"
TARGET[$__partialDir]="$OSYNC_DIR/$partialDir" # unused
TARGET[$__initiatorLastActionFile]="$TARGET_SYNC_DIR$OSYNC_DIR/$stateDir/initiator-$lastAction-$INSTANCE_ID$drySuffix" # unused
TARGET[$__targetLastActionFile]="$TARGET_SYNC_DIR$OSYNC_DIR/$stateDir/target-$lastAction-$INSTANCE_ID$drySuffix" # unused
TARGET[$__resumeCount]="$TARGET_SYNC_DIR$OSYNC_DIR/$stateDir/$resumeCount-$INSTANCE_ID$drySuffix" # unused
TARGET[$__treeCurrentFile]="-tree-current-$INSTANCE_ID$drySuffix" # unused
TARGET[$__treeAfterFile]="-tree-after-$INSTANCE_ID$drySuffix" # unused
TARGET[$__treeAfterFileNoSuffix]="-tree-after-$INSTANCE_ID" # unused
TARGET[$__deletedListFile]="-deleted-list-$INSTANCE_ID$drySuffix" # unused
TARGET[$__failedDeletedListFile]="-failed-delete-$INSTANCE_ID$drySuffix"
TARGET[$__successDeletedListFile]="-success-delete-$INSTANCE_ID$drySuffix"
TARGET[$__timestampCurrentFile]="-timestamps-current-$INSTANCE_ID$drySuffix"
TARGET[$__timestampAfterFile]="-timestamps-after-$INSTANCE_ID$drySuffix"
TARGET[$__timestampAfterFileNoSuffix]="-timestamps-after-$INSTANCE_ID"
TARGET[$__conflictListFile]="conflicts-$INSTANCE_ID$drySuffix"
TARGET[$__updateTriggerFile]="$pushFile"
PARTIAL_DIR="${INITIATOR[$__partialDir]}"
## Set sync only function arguments for rsync
SYNC_OPTS="-u"
if [ $_LOGGER_VERBOSE == true ] || [ $_SUMMARY == true ]; then
SYNC_OPTS=$SYNC_OPTS" -i"
fi
if [ $STATS == true ]; then
SYNC_OPTS=$SYNC_OPTS" --stats"
fi
## Add Rsync include / exclude patterns
if [ "$_SYNC_ON_CHANGES" != "target" ]; then
RsyncPatterns
fi
## Conflict options
if [ "$CONFLICT_BACKUP" != false ]; then
INITIATOR_BACKUP="--backup --backup-dir=\"${INITIATOR[$__backupDir]}\""
TARGET_BACKUP="--backup --backup-dir=\"${TARGET[$__backupDir]}\""
if [ "$CONFLICT_BACKUP_MULTIPLE" == true ]; then
INITIATOR_BACKUP="$INITIATOR_BACKUP --suffix .$(date +%Y.%m.%d-%H.%M.%S)"
TARGET_BACKUP="$TARGET_BACKUP --suffix .$(date +%Y.%m.%d-%H.%M.%S)"
fi
else
INITIATOR_BACKUP=""
TARGET_BACKUP=""
fi
SYNC_ACTION=(
'replica-tree'
'deleted-list'
'timestampList-list'
'conflict-list'
'sync_attrs'
'update-replica'
'delete-propagation'
'replica-tree-after'
'timestampList-after'
'synced'
)
}
function Main {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
HandleLocks
Sync
}
function Usage {
__CheckArguments 0 $# "$@" #__WITH_PARANOIA_DEBUG
if [ "$IS_STABLE" != true ]; then
echo -e "\e[93mThis is an unstable dev build. Please use with caution.\e[0m"
fi
echo "$PROGRAM $PROGRAM_VERSION $PROGRAM_BUILD"
echo "$AUTHOR"
echo "$CONTACT"
echo ""
echo "You may use $PROGRAM with a full blown configuration file, or use its default options for quick command line sync."
echo "Usage: $0 /path/to/config/file [OPTIONS]"
echo "or $0 --initiator=/path/to/initiator/replica --target=/path/to/target/replica [OPTIONS] [QUICKSYNC OPTIONS]"
echo "or $0 --initiator=/path/to/initiator/replica --target=ssh://[backupuser]@remotehost.com[:portnumber]//path/to/target/replica [OPTIONS] [QUICKSYNC OPTIONS]"
echo ""
echo "[OPTIONS]"
echo "--dry Will run osync without actually doing anything; just testing"
echo "--no-prefix Will suppress time / date suffix from output"
echo "--silent Will run osync without any output to stdout, used for cron jobs"
echo "--errors-only Output only errors (can be combined with silent or verbose)"
echo "--summary Outputs a list of transferred / deleted files at the end of the run"
echo "--log-conflicts [EXPERIMENTAL] Outputs a list of conflicted files"
echo "--alert-conflicts Send an email if conflictual files found (implies --log-conflicts)"
echo "--verbose Increases output"
echo "--stats Adds rsync transfer statistics to verbose output"
echo "--partial Allows rsync to keep partial downloads that can be resumed later (experimental)"
echo "--no-maxtime Disables any soft and hard execution time checks"
echo "--force-unlock Will override any existing active or dead locks on initiator and target replica"
echo "--on-changes Will launch a sync task after a short wait period if there is some file activity on initiator replica. You should try daemon mode instead"
echo "--on-changes-target Will trigger ansync task on initiator if initiator runs daemon mode. You should call this with the osync-target-helper service"
echo "--no-resume Do not try to resume a failed run. By default, execution is resumed once"
echo "--initialize Create file lists without actually synchronizing anything, this will help setup deletion detections before the first run"
echo ""
echo "[QUICKSYNC OPTIONS]"
echo "--initiator=\"\" Master replica path. Will contain state and backup directory (is mandatory)"
echo "--target=\"\" Local or remote target replica path. Can be a ssh uri like ssh://user@host.com:22//path/to/target/replica (is mandatory)"
echo "--rsakey=\"\" Alternative path to rsa private key for ssh connection to target replica"
echo "--password-file=\"\" If no rsa private key is used for ssh authentication, a password file can be used"
echo "--remote-token=\"\" When using ssh filter protection, you must specify the remote token set in ssh_filter.sh"
echo "--instance-id=\"\" Optional sync task name to identify this synchronization task when using multiple targets"
echo "--skip-deletion=\"\" You may skip deletion propagation on initiator or target. Valid values: initiator target initiator,target"
echo "--sync-type=\"\" Allows osync to run in unidirectional sync mode. Valid values: initiator2target, target2initiator"
echo "--destination-mails=\"\" Double quoted list of space separated email addresses to send alerts to"
echo ""
echo "Additionaly, you may set most osync options at runtime. eg:"
echo "SOFT_DELETE_DAYS=365 $0 --initiator=/path --target=/other/path"
echo ""
exit 128
}
function SyncOnChanges {
local isTargetHelper="${1:-false}" # Is this service supposed to be run as target helper ?
__CheckArguments 1 $# "$@" #__WITH_PARANOIA_DEBUG
local watchDirectory
local watchCmd
local osyncSubcmd
local retval
if [ "$LOCAL_OS" == "MacOSX" ]; then
if ! type fswatch > /dev/null 2>&1 ; then
Logger "No fswatch command found. Cannot monitor changes." "CRITICAL"
exit 1
fi
else
if ! type inotifywait > /dev/null 2>&1 ; then
Logger "No inotifywait command found. Cannot monitor changes." "CRITICAL"
exit 1
fi
fi
if [ $isTargetHelper == false ]; then
if [ ! -d "$INITIATOR_SYNC_DIR" ]; then
Logger "Initiator directory [$INITIATOR_SYNC_DIR] does not exist. Cannot monitor." "CRITICAL"
exit 1
fi
watchDirectory="$INITIATOR_SYNC_DIR"
if [ "$ConfigFile" != "" ]; then
osyncSubcmd='bash '$osync_cmd' "'$ConfigFile'" '$opts
else
osyncSubcmd='bash '$osync_cmd' '$opts
fi
Logger "#### Running $PROGRAM in initiator file monitor mode." "NOTICE"
else
if [ ! -d "$TARGET_SYNC_DIR" ]; then
Logger "Target directory [$TARGET_SYNC_DIR] does not exist. Cannot monitor." "CRITICAL"
exit 1
fi
watchDirectory="$TARGET_SYNC_DIR"
Logger "#### Running $PROGRAM in target helper file monitor mode." "NOTICE"
fi
while true; do
if [ $isTargetHelper == false ]; then
Logger "Daemon cmd: [$osyncSubcmd]" "DEBUG"
eval "$osyncSubcmd"
retval=$?
if [ $retval -ne 0 ] && [ $retval != 2 ]; then
Logger "$PROGRAM child exited with error." "ERROR" $retval
fi
else
# Notify initiator about target changes
TriggerInitiatorRun
fi
Logger "#### Monitoring now." "NOTICE"
# inotifywait < 3.20 can't handle multiple --exclude statements. For compat issues, we'll watch everything except .osync_workdir
if [ "$LOCAL_OS" == "MacOSX" ]; then
watchCmd="fswatch --exclude \"$OSYNC_DIR\" -1 \"$watchDirectory\" > /dev/null"
# Mac fswatch doesn't have timeout switch, replacing wait $! with WaitForTaskCompletion without warning nor spinner and increased SLEEP_TIME to avoid cpu hogging. This simulates wait $! with timeout
Logger "Watch cmd M: [$watchCmd]." "DEBUG"
eval "$watchCmd" &
ExecTasks $! "MonitorMacOSXWait" false 0 0 0 $MAX_WAIT true 1 0
elif [ "$LOCAL_OS" == "BSD" ]; then
# BSD version of inotifywait does not support multiple --exclude statements
watchCmd="inotifywait --exclude \"$OSYNC_DIR\" -qq -r -e create -e modify -e delete -e move -e attrib --timeout \"$MAX_WAIT\" \"$watchDirectory\""
Logger "Watch cmd B: [$watchCmd]." "DEBUG"
eval "$watchCmd" &
wait $!
else
watchCmd="inotifywait --exclude \"$OSYNC_DIR\" -qq -r -e create -e modify -e delete -e move -e attrib --timeout \"$MAX_WAIT\" \"$watchDirectory\""
Logger "Watch cmd L: [$watchCmd]." "DEBUG"
eval "$watchCmd" &
wait $!
fi
retval=$?
if [ $retval -eq 0 ]; then
Logger "#### Changes detected, waiting $MIN_WAIT seconds before running next sync." "NOTICE"
sleep $MIN_WAIT
# inotifywait --timeout result is 2, WaitForTaskCompletion HardTimeout is 1
elif [ "$LOCAL_OS" == "MacOSX" ]; then
Logger "#### Changes or error detected, waiting $MIN_WAIT seconds before running next sync." "NOTICE"
elif [ $retval -eq 2 ]; then
Logger "#### $MAX_WAIT timeout reached, running sync." "NOTICE"
elif [ $retval -eq 1 ]; then
Logger "#### inotify error detected, waiting $MIN_WAIT seconds before running next sync." "ERROR" $retval
sleep $MIN_WAIT
elif [ $retval -eq 127 ]; then
Logger "inotifywait could not load succesfully. Please check if all necessary libraries for inotifywait are present." "CRITICAL"
exit 1
fi
done
}
#### SCRIPT ENTRY POINT
# First TrapQuit declaration before knowing if we run as daemon or not
trap TrapQuit TERM EXIT HUP QUIT
# quicksync mode settings, overriden by config file
STATS=false
PARTIAL=no
if [ "$CONFLICT_PREVALANCE" == "" ]; then
CONFLICT_PREVALANCE=initiator
fi
DESTINATION_MAILS=""
INITIATOR_LOCK_FILE_EXISTS=false
TARGET_LOCK_FILE_EXISTS=false
FORCE_UNLOCK=false
LOG_CONFLICTS=false
ALERT_CONFLICTS=false
no_maxtime=false
opts=""
ERROR_ALERT=false
WARN_ALERT=false
# Number of CTRL+C needed to stop script
SOFT_STOP=2
# Number of given replicas in command line
_QUICK_SYNC=0
_SYNC_ON_CHANGES=false
_NOLOCKS=false
osync_cmd=$0
_SUMMARY=false
INITIALIZE=false
if [ "$MIN_WAIT" == "" ]; then
MIN_WAIT=60
fi
if [ "$MAX_WAIT" == "" ]; then
MAX_WAIT=7200
fi
# Global counters for --summary
INITIATOR_UPDATES_COUNT=0
TARGET_UPDATES_COUNT=0
INITIATOR_DELETES_COUNT=0
TARGET_DELETES_COUNT=0
function GetCommandlineArguments {
local isFirstArgument=true
if [ $# -eq 0 ]
then
Usage
fi
for i in "${@}"; do
case "$i" in
--dry)
_DRYRUN=true
opts=$opts" --dry"
;;
--silent)
_LOGGER_SILENT=true
opts=$opts" --silent"
;;
--verbose)
_LOGGER_VERBOSE=true
opts=$opts" --verbose"
;;
--stats)
STATS=true
opts=$opts" --stats"
;;
--partial)
PARTIAL=true
opts=$opts" --partial"
;;
--force-unlock)
FORCE_UNLOCK=true
opts=$opts" --force-unlock"
;;
--no-maxtime)
no_maxtime=true
opts=$opts" --no-maxtime"
;;
--help|-h|--version|-v)
Usage
;;
--initiator=*)
_QUICK_SYNC=$((_QUICK_SYNC + 1))
INITIATOR_SYNC_DIR="${i##*=}"
opts=$opts" --initiator=\"$INITIATOR_SYNC_DIR\""
;;
--target=*)
_QUICK_SYNC=$((_QUICK_SYNC + 1))
TARGET_SYNC_DIR="${i##*=}"
opts=$opts" --target=\"$TARGET_SYNC_DIR\""
;;
--rsakey=*)
SSH_RSA_PRIVATE_KEY="${i##*=}"
opts=$opts" --rsakey=\"$SSH_RSA_PRIVATE_KEY\""
;;
--password-file=*)
SSH_PASSWORD_FILE="${i##*=}"
opts=$opts" --password-file=\"$SSH_PASSWORD_FILE\""
;;
--instance-id=*)
INSTANCE_ID="${i##*=}"
opts=$opts" --instance-id=\"$INSTANCE_ID\""
;;
--skip-deletion=*)
opts=$opts" --skip-deletion=\"${i##*=}\""
SKIP_DELETION="${i##*=}"
;;
--sync-type=*)
opts=$opts" --sync-type=\"${i##*=}\""
SYNC_TYPE="${i##*=}"
;;
--on-changes)
_SYNC_ON_CHANGES="initiator"
_NOLOCKS=true
_LOGGER_PREFIX="date"
;;
--on-changes-target)
_SYNC_ON_CHANGES="target"
_NOLOCKS=true
_LOGGER_PREFIX="date"
;;
--no-resume)
opts=$opts" --no-resume"
RESUME_TRY=0
;;
--no-locks)
_NOLOCKS=true
;;
--errors-only)
opts=$opts" --errors-only"
_LOGGER_ERR_ONLY=true
;;
--summary)
opts=$opts" --summary"
_SUMMARY=true
;;
--log-conflicts)
LOG_CONFLICTS=true
opts=$opts" --log-conflicts"
;;
--alert-conflicts)
ALERT_CONFLICTS=true
LOG_CONFLICTS=true
opts=$opts" --alert-conflicts"
;;
--initialize)
INITIALIZE=true
opts=$opts" --initialize"
;;
--no-prefix)
opts=$opts" --no-prefix"
_LOGGER_PREFIX=""
;;
--destination-mails=*)
DESTINATION_MAILS="${i##*=}"
;;
--remote-token=*)
_REMOTE_TOKEN="${i##*=}"
;;
*)
if [ $isFirstArgument == false ]; then
Logger "Unknown option '$i'" "CRITICAL"
Usage
fi
;;
esac
isFirstArgument=false
done
# Remove leading space if there is one
opts="${opts# *}"
}
GetCommandlineArguments "${@}"
## Here we set default options for quicksync tasks when no configuration file is provided.
if [ $_QUICK_SYNC -eq 2 ]; then
if [ "$INSTANCE_ID" == "" ]; then
INSTANCE_ID="quicksync_task"
fi
# Let the possibility to initialize those values directly via command line like SOFT_DELETE_DAYS=60 ./osync.sh
if [ $(IsInteger $MINIMUM_SPACE) -ne 1 ]; then
MINIMUM_SPACE=1024
fi
if [ $(IsInteger $CONFLICT_BACKUP_DAYS) -ne 1 ]; then
CONFLICT_BACKUP_DAYS=30
fi
if [ $(IsInteger $SOFT_DELETE_DAYS) -ne 1 ]; then
SOFT_DELETE_DAYS=30
fi
if [ $(IsInteger $RESUME_TRY) -ne 1 ]; then
RESUME_TRY=1
fi
if [ $(IsInteger $SOFT_MAX_EXEC_TIME) -ne 1 ]; then
SOFT_MAX_EXEC_TIME=0
fi
if [ $(IsInteger $HARD_MAX_EXEC_TIME) -ne 1 ]; then
HARD_MAX_EXEC_TIME=0
fi
if [ $(IsInteger $MAX_EXEC_TIME_PER_CMD_BEFORE) -ne 1 ]; then
MAX_EXEC_TIME_PER_CMD_BEFORE=0
fi
if [ $(IsInteger $MAX_EXEC_TIME_PER_CMD_AFTER) -ne 1 ]; then
MAX_EXEC_TIME_PER_CMD_AFTER=0
fi
if [ "$PATH_SEPARATOR_CHAR" == "" ]; then
PATH_SEPARATOR_CHAR=";"
fi
if [ $(IsInteger $MIN_WAIT) -ne 1 ]; then
MIN_WAIT=30
fi
# First character shouldn't be '-' when config file given
elif [ "${1:0:1}" != "-" ]; then
ConfigFile="${1}"
LoadConfigFile "$ConfigFile" $CONFIG_FILE_REVISION_REQUIRED
else
Logger "Wrong arguments given. Expecting a config file or initiator and target arguments." "CRITICAL"
exit 1
fi
if [ "$LOGFILE" == "" ]; then
if [ -w /var/log ]; then
LOG_FILE="/var/log/$PROGRAM.$INSTANCE_ID.log"
elif ([ "$HOME" != "" ] && [ -w "$HOME" ]); then
LOG_FILE="$HOME/$PROGRAM.$INSTANCE_ID.log"
else
LOG_FILE="./$PROGRAM.$INSTANCE_ID.log"
fi
else
LOG_FILE="$LOGFILE"
fi
if [ ! -w "$(dirname $LOG_FILE)" ]; then
echo "Cannot write to log [$(dirname $LOG_FILE)]."
else
Logger "Script begin, logging to [$LOG_FILE]." "DEBUG"
fi
if [ "$IS_STABLE" != true ]; then
Logger "This is an unstable dev build [$PROGRAM_BUILD]. Please use with caution." "WARN"
fi
# v2 config syntax compatibility
UpdateBooleans
GetLocalOS
InitLocalOSDependingSettings
PreInit
Init
CheckEnvironment
PostInit
# Add exclusion of $INITIATOR[$__updateTriggerFile] to rsync patterns used by sync functions, but not by daemon
RSYNC_FULL_PATTERNS="$RSYNC_PATTERNS --exclude=${INITIATOR[$__updateTriggerFile]}"
if [ $_QUICK_SYNC -lt 2 ]; then
if [ "$_SYNC_ON_CHANGES" == false ]; then
CheckCurrentConfig true
else
CheckCurrentConfig false
fi
fi
CheckCurrentConfigAll
DATE=$(date)
Logger "-------------------------------------------------------------" "NOTICE"
Logger "$DRY_WARNING$DATE - $PROGRAM $PROGRAM_VERSION script begin." "ALWAYS"
Logger "-------------------------------------------------------------" "NOTICE"
Logger "Sync task [$INSTANCE_ID] launched as $LOCAL_USER@$LOCAL_HOST (PID $SCRIPT_PID)" "NOTICE"
if [ "$_SYNC_ON_CHANGES" == "initiator" ]; then
SyncOnChanges false
elif [ "$_SYNC_ON_CHANGES" == "target" ]; then
SyncOnChanges true
else
GetRemoteOS
InitRemoteOSDependingSettings
if [ $no_maxtime == true ]; then
SOFT_MAX_EXEC_TIME=0
HARD_MAX_EXEC_TIME=0
fi
CheckReplicas
RunBeforeHook
if [ "$INITIALIZE" == true ]; then
HandleLocks
Initialize
else
Main
if [ $? -eq 0 ]; then
SoftDelete
fi
if [ $_SUMMARY == true ]; then
Summary
fi
if [ $LOG_CONFLICTS == true ]; then
LogConflicts
fi
fi
fi